Flow Rate
Measure
Quote Cart
Pumps from IPP. Over 716 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.
Highest-ranked available inventory for this selection.
Pumps from IPP. Over 716 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.
Choose a subtype for a more focused set of listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
Enter a keyword to match this specification.
Showing 25 of 716 matching Pumps.
diesel centrifugal firewater pump system system consists of:(1) skid mounted 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" CMBB, serial #690603/1, 2000 rpm, packed gland on shaft, driven by a Leyland diesel engine, unit # CPU-3836, type PU401/21/3, engine # 911288, type UE401/113/3, tappet clearance 020" cold, injection 26 deg before top dead center, firing order 153624, exhaust with a silencer,(1) electric driven back up pump, 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" E-NE-B, serial # 690602/1, 3000 rpm, packed gland on shaft, direct driven by 60 hp, 3/50/380/420 volt, 2940 rpm motor,(1) Jockey pump with gauges and valves(1) control panel
This Aquadyne 3300DST is a robust, mobile, Detroit Diesel-powered reciprocating pump built to deliver very high pressure (up to 10,000 psi) at 45 GPM. Its design makes it well-suited for clean-in-place (CIP) operations—such as high-pressure tank washing—where reliability and performance are critical. This system includes a tank pressure washing module for installation on manways to perform CIP operations.
3-step Membrane dosing/metering pump
with vent screw on each pump head
1.4571 pulsation absorber 0,5 l, G 3/8’’,
Element A: 1100 l/h @ max 10.5 bar
Element B and C: 550 l/h @ 4.2 bar
3/50/400/690 volt,
1.5 m3/hour at 150 bar
24-64 lift/minute,
2000 to 5000 cubic meter per hour
triple head diaphragm pump
working pressure 80 bar, max permissible working pressure 100 bar @ -196 degrees C
driven by a 2-speed motor
52kw, 3/60/440/480 volt, 1770 rpm motor via a Lenze type 12.602.32.15
(5) 321 stainless steel valves,
25 Ra electropolished internal finish with a silicon carbide double mechanical seal.
Viton is the elastomer material.
8" x 6" impellor.
Vert split, end suction, top discharge.
No motor.
takes 900 HP, 3600 rpm motor. 4000 Volts.
direct driven by 2-speed motor
11kw, 3/50/380/660 volt, 2935 rpm
direct driven by 2-speed motor
11kw, 3/50/380/660 volt, 2935 rpm
direct driven by 2-speed motor
11kw, 3/50/380/660 volt, 2935 rpm
380/660 volt
11 kw, 3/50/380/660 volt, 2935 rpm
direct driven by 2-speed motor,
11kw, 3/50/380/660 volt, 2935 rpm
Mfd by Fansteel 63
Vert split, end suction, top discharge.
No motor.
316 stainless steel Peroni piston pump
(5) 80mm diameter horizontal pistons
160 mm stroke
direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer
type D800
3~/50Hz/500V/345A/1488rpm motor,
Includes shell and tube cooler, and lubricating pump
Peroni piston pump
(5) 80mm diameter horizontal pistons
160 mm stroke
direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer
type D800
rated 233 HP, 1460 /116 rpm
Motor: 345A
CE stamped
Includes shell and tube cooler, and lubricating pump
(5) 80mm diameter horizontal pistons
160 mm stroke
direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer
type D800
rated 233 HP, 1460 /116 rpm
Motor: 345 A
CE stamped
Includes shell and tube cooler, and lubricating pump
Peroni piston pump
(5) 80mm diameter horizontal pistons
160 mm stroke
direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer
type D800
3~/50Hz/500V/345A/1488rpm motor
Includes shell and tube cooler and lubricating pump
Peroni piston pump
(5) 80mm diameter pistons
160 mm stroke
direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer
type D800
serial#:37406
rated 233 HP, 1460 /116 rpm
Motor: 345A
Includes shell and tube cooler, and lubricating pump
40m conveying height
with carbon steel housing and stainless steel bucket wheel
openings: (1) DN125, (1) DN150
no motor
Used industrial pumps from IPP encompass a wide range of machinery essential for fluid handling and processing across various industries. Whether you require centrifugal, positive displacement, or vacuum pumps, IPP offers equipment that meets your specific needs. With over 47 years of industry experience, IPP supplies used, surplus, and secondhand pump equipment from 20 global plant sites and maintains a ready-to-ship inventory of 15,000+ process systems.
IPP stocks equipment from leading manufacturers such as Goulds, Flowserve, Alfa Laval, and Waukesha, ensuring quality and reliability.
To ensure durability and compliance, pump equipment is typically constructed from:
Discover how used industrial pumps can enhance your processing efficiency at Machinery & Equipment Co.
Have questions about Pumps or our services? Learn more about our products and why customers choose IPP.
