Quote Cart
20 kg typical batch weight
(Polished to a 0.1 Ra Min finish) high shear granulator
Designed for cGMP production, it is a contained system, and can be used for other process’ such as food agglomeration
Standard capacity range is 24-48 liters
This granulator features a through the wall design where the utilities are located outside the clean room
It has a jacket for the base and bowl with temperature sensor and ¾” BSP connections
The loading chute and is 4” CPC and designed for Hyco Flex loading. The main impeller is an M-8 and is capable of being raised and lowered
The side chopping system is driven by a 4-kw motor
with variable speed control. The discharge and transfer chute is 2” CPC. Discharge is into a through the wall mill, Comil, model U-10, with a 0.1 Ra finish. The mill is driven by a 1.8 k-w motor with variable speed control. The Granulator features sanitary design and features clean in place. It has the ability for solutions addition, and is fully automated. This multipurpose machine can process dry powders, aqueous and solvent granulations, effervescent products, and melt palletization applications. It is designed for rapid change overs and easy cleaning. This machinery is electronically controlled and can be operated by a local operations station. The Advance 60 mill can be part of an integrated system with upstream and downstream equipment. This mill can be used with Fluid bed dryer IPP stock # 233966. And a CIP skid is available at additional cost, see IPP stock number 234966.
Type: Pulverizer
Subtype: Granulator/Disintegrator
Manufacturer: GEA
Model: Pharmodule PMA Advance 300
Condition: Unused
Material: Stainless Steel 316L
Capacity: 0.23 m3 (7.9 ft3)
Outlet Discharge Diameter: 50.8 mm (2 in)
100 kg typical batch weight
(Polished to a 0.1 Ra Min finish)
Standard capacity range is 120-240 liters. This granulator features a through the wall design where the utilities are located outside the clean room. It has a jacket for the base and bowl with temperature sensor. The main impeller is capable of being raised and lowered. The side chopping system has a variable speed control.
Discharge is into a through the wall mill model U-20. Features sanitary design and Clean in place. This multipurpose machine can process dry powders, aqueous and solvent granulations, effervescent products, and melt palletization applications.
This machinery is electronically controlled. Can be used with Fluid bed dryer IPP stock # 233968.
Inlet Diameter: 101.6 mm (4 in). Motor Power (Design): 15 kW (20.1 HP). Orientation: Vertical. Choppers: Yes side mounted with VFD-7.5 kW. Jacket: Yes. Clean In Place: Yes.
Type: Pulverizer
Subtype: Granulator/Disintegrator
Manufacturer: Quadro Engineering
Model: 194S
Condition: Used
Material: Stainless Steel 316
Outlet Discharge Diameter: 304.8 mm (12 in)
Inlet Diameter: 304.8 mm (12 in)
Conical Screen mill with 1/8" mesh screen
sanitary design and overdriven for ease of operation and maintenance.
Designed to operate at 4,000 lbs an hour.(with 8" screen.)
Various screen sizes available from the manufacturer.
Motor Power (Design): 7.5 kW (10 HP). Orientation: Vertical.
Type: Pulverizer
Subtype: Granulator/Disintegrator
Manufacturer: Condux
Model: CST 250/G
Condition: Used
Material: Stainless Steel 316
Motor Power (Design): 11 kW (14.8 HP)
Orientation: Vertical
14 hp
380-660 volt, IP54,
vibrating pan feeder
magnetic separator driven by 0.25 kw, 3/50/380-220 volt 1370 rpm,
ex proof motor. Gear box of the Mill is water cooled
Type: Pulverizer
Subtype: Granulator/Disintegrator
Manufacturer: Condux
Model: CUM 280/S-D
Condition: Used
Material: Stainless Steel 316
Inlet Diameter: 100 mm (3.9 in)
Motor Power (Design): 11 kW (14.8 HP)
2995 rpm,
hinged front cover, 100mm feed pipe,
Speed (RPM): 2,995. Orientation: Horizontal.