Stainless Steel 316 Clad Albi TUV Batch-Type Agitated Reactor - IPP# 236014

Type: Reactor

Subtype: Batch-Type Agitated

Manufacturer: HINKE

Model: TUV

Condition: Used

Material: Stainless Steel Austenitic

Capacity (Design): 12,800 L (3,381 gallons)

Internal Pressure: 3 bar (43.5 psi)

11000 liter reactor/crystaliser TUV internal pressure -1/3 bar @ 130 degrees C (12800 liter) jackets 1/6 bar @ 120 degrees C (54/315 liter) 2m diameter x 3350mm straight side x 1110mm high bottom cone mechanical seal with lubricator (1) 316L stainless steel flat half pipe coil jacket on straight side (1) 316L stainless steel dimple jacket on bottom cone

Internal Full Vacuum: Yes. Internal Temperature: 130 °C (266 °F). Jacket Pressure: 6 bar (87 psi). Jacket Temperature: 120 °C (248 °F). Jacket Material of Construction: Stainless Steel 316. Agitation: Yes. Diameter: 2,000 mm (78.7 in). Straight Side Length: 3,350 mm (131.9 in). Support Type: Lugs.

Type: Reactor

Subtype: Batch-Type Agitated

Manufacturer: Enco

Model: TUV

Condition: Used

Material: Stainless Steel Austenitic

Capacity (Design): 3,630 L (958.9 gallons)

Internal Pressure: 2 bar (29 psi)

3200 liter TUV internal pressure -1/2 bar @ 110 degrees C (3630 liter), jacket 8 bar @ 220 degrees C (140 liter) Motor: 3 phase interrupted ribbon type agitator mechanical seal with lubricator pot 316Ti stainless steel (1.4571) half pipe coil jacket on straight side, 316Ti stainless steel (1.4571) standard jacket on bottom dish

Internal Temperature: 110 °C (230 °F). Jacket Pressure: 8 bar (116 psi). Jacket Temperature: 220 °C (428 °F). Jacket Material of Construction: Stainless Steel Austenitic. Agitation: Yes. Diameter: 1,600 mm (63 in). Straight Side Length: 1,321 mm (52 in). Support Type: Lugs.

Type: Reactor

Subtype: Batch-Type Agitated

Manufacturer: GIG

Model: TUV

Condition: Used

Material: Stainless Steel Austenitic

Capacity (Design): 2,640 L (697.4 gallons)

Internal Full Vacuum: Yes

2000 liter TUV internal pressure vacuum @ 150 degrees C (2640 liter), jacket 12 bar @ 220 degrees C (85 liter) Ekato agitator drive

Internal Temperature: 150 °C (302 °F). Jacket Pressure: 12 bar (174 psi). Jacket Temperature: 220 °C (428 °F). Agitation: Yes. Support Type: Lugs.

Type: Reactor

Subtype: Batch-Type Agitated

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 757.1 L (200 gallons)

Jacket Material of Construction: Carbon Steel

• With Lightnin, 1.5 hp mixer.
• 1" jacket supply and return lines.

Orientation: Vertical. Diameter: 965.2 mm (38 in). Straight Side Length: 914.4 mm (36 in). Support Type: Legs.