Quote Cart
Type: Evaporator
Subtype: Rising/Falling Film
Manufacturer: Buflovak/Blaw Knox
Condition: Used
Material: Stainless Steel 316
Evaporation Rate: 7,257 kg/h (16,000 lb/h)
Total Heat Transfer Surface Area: 83.6 m² (900 ft²)
tubular evaporation system manufactured by Buflovak-Blaw-Knox. Includes 5 main pieces and support equipment such as pumps and small plate heat exchanger. Main pieces are as follows:(D) 1st effect steam chest (heat exchanger), 900 Sq Ft. NB #8255/ 9393, SN # 17669/18701, (1997) rated for 50 psi at 300 degrees on the shell, Model 1256642. 36" diameter x 10' OAL mounted vertical. (C) 1st effect vapor separator, RRFC, 42" diameter x 9' OAL with top side man way and "York" style 931 316 SS demisting mesh packing for vapor carry over.(needs to be replaced). (E) 2nd effect heater, 4' diameter x 13' OAL, with (B) 38" diameter x 8' OAL separator with cone bottom. NB # 3136, serial # 11514, Rated for MAWP Vacuum at 179 degrees F. ( HSB # 2544B) Plant # S-11181-2. With 18" man way and sight glass. With 12" interconnecting pipe, and elbow pump. Overhead condenser (A) approx. 2000 Sq. ft., 316 SS , 2/4 pass on tube side(cooling) with 12" water inlet/outlet. Discharge of overheads to distillate.
30" diameter x 10' 3" OAL, saddle mounted, with two 40 Lb. steam jets to supply vacuum.
Pressure: 3.4 bar (50 psi). Temperature: 148.9 °C (300 °F).
Type: Evaporator
Subtype: Rising/Falling Film
Manufacturer: Buflovak/Blaw Knox
Condition: Used
Material: Stainless Steel 304
Evaporation Rate: 9,573 kg/h (21,105 lb/h)
Total Heat Transfer Surface Area: 392.1 m² (4,221 ft²)
Second Effect separator replaced by IPS, Inc.-Condenser changed from original design and now is an Alfa Laval spiral, IPP stock # 246876. 270 Sq.Ft., 316 SS clad on CS, 55 psi at 300 degrees F.
Orientation: Vertical. Pressure: 0.97 bar (14 psi). Temperature: 148.9 °C (300 °F). Vacuum: Yes. Number of Effects: 2. Vapor Body #1: 304 SS top 54" diameter x 84" long (vapor) bottom is 24" diameter x 72" long. (liquid) Lug mounted, with welded dish heads.. Vapor Body # 2: 304 SS 64" diameter x 150' straight side with welded dish heads. Lug mounted. Manufactured by IPS Inc. serial # 05-1122, NB # 135.. Steam Chest #1: 2315 Sq.Ft., 304 SS with CS shell, vertical steam chest. 38" diameter x 157" long, with clamped heads mounted by lugs. Estimated 442 straight tubes 2" OD x 10" long.. Steam Chest # 2: 1906 Sq.Ft., 304SS tubes with CS shell vertical steam chest. 32" diameter x 163" long side with clamped heads, mounted by lugs. Estimated 364 straight tubes 2" OD x 10' long.. Condenser: Alfa Laval spiral, See stock # 246876 for details. Feed Heating: No.
Type: Evaporator
Subtype: Rising/Falling Film
Condition: Used
Material: Stainless Steel 316
Total Heat Transfer Surface Area: 17.3 m² (186.2 ft²)
Orientation: Vertical
SMS vertical single effect falling film evaporator, c/steel heads pressure shell side 5.5/8 bar @ 160/170 degrees C (190 liter) tube side vacuum @ 45/145 degrees C (160 liter), Shell dimensions: 368mm diameter x 8mm
Pressure: 8 bar (116 psi). Temperature: 170 °C (338 °F). Vacuum: Yes.
Type: Evaporator
Subtype: Rising/Falling Film
Manufacturer: APV Mitchell
Condition: Used
Material: Stainless Steel 316
Evaporation Rate: 7,620 kg/h (16,800 lb/h)
Total Heat Transfer Surface Area: 24.9 m² (268 ft²)
4-effect (Kestner) falling film evaporator system product flow rate 5600 lbs/hr @ 48 degrees C, feed flow rate 22400 lbs/hr @ 90 degrees C, System consists of: (1) 24 square meter (268 square feet) 316 stainless steel tube, head and shell vertical falling film evaporator (1st effect), manufactured by APV Mitchell ltd, serial #9/388630/73, working pressure tube side 15 psig + full vacuum @ 100 degrees C, shell 9.5 psig + full vacuum @ 170 degrees C, (38) 1½” diameter x 16 swg x 20’ long 316 stainless steel tubes, 316 stainless steel tube sheets, 14” diameter 316 stainless steel shell, (2) 316 stainless steel dished heads, top head with distributor plate, mounted on lugs, (1) 57 square meter (616 square feet) 316 stainless steel tube, head and shell vertical falling film evaporator (2nd effect), manufactured by APV Mitchell ltd, serial #9/388640/73, working pressure tube side 9 psig + full vacuum @ 87 degrees C, shell 15 psig + full vacuum @ 100 degrees C, (88) 1½” diameter x 16 swg x 20’ long 316 stainless steel tubes, 316 stainless steel tube sheets, 21” diameter 316 stainless steel shell, (2) 316 stainless steel dished heads, top head with distributor plate, mounted on lugs, (1) 71 square meter (770 square feet) 316 stainless steel tube, head and shell vertical falling film evaporator (3rd effect), manufactured by APV Mitchell ltd, serial #9/388650/73, working pressure tube side full vacuum @ 71 degrees C, shell full vacuum @ 87 degrees C, (109) 1½” diameter x 16 swg x 20’ long 316 stainless steel tubes, 316 stainless steel tube sheets, 23” diameter 316 stainless steel shell, (2) 316 stainless steel dished heads, top head with distributor plate, mounted on lugs, (1) 99 square meter (1070 square feet) 316 stainless steel tube, head and shell vertical falling film evaporator (4th effect), manufactured by APV Mitchell ltd, serial #9/388660/73, working pressure tube side full vacuum @ 50 degrees C, shell full vacuum @ 70 degrees C, (151) 1½” diameter x 20’ long 316 stainless steel tubes, 316 stainless steel tube sheets, 27” diameter 316 stainless steel shell, (2) 316 stainless steel dished heads, top head with distributor plate, mounted on lugs, (1) 30 square meter (330 square feet) 316 stainless steel tube, head and shell vertical condenser (pre-heater), manufactured by Stainless Steel Plant Ltd, serial #4414, design pressure tubeside 110 psi @ 187 degrees C, shell 33 psi @ 130 degrees C, (63) 1” diameter x 20’ long 316 stainless steel tubes, 316 stainless steel tube sheets, 16” diameter 316 stainless steel shell, (2) 316 stainless steel flat heads, mounted on lugs (1) 99 square meter (1072 square feet) 316 stainless steel tube, head and shell horizontal condenser (vacuum condenser), manufactured by Stainless Steel Plant Ltd, serial #4415, design pressure tubeside 100 psi @ 50 degrees C, shell full vacuum @ 50 degrees C, (256) 1” diameter x 16’ long 316 stainless steel tubes, 2-pass tubeside, 316 stainless steel tube sheets, 25” diameter 316 stainless steel shell, (2) 316 stainless steel dished heads, mounted on saddles (1) approx 670 liter 316 stainless steel separator (1st effect), manufactured by APV, serial #388530, design pressure 17 psig + full vacuum @ 126 degrees C, 2’ 6” diameter x 4’ 6” straight side, bolt dished top, weld coned bottom, mounted on lugs, (1) approx 880 liter 316 stainless steel separator (2nd effect), manufactured by APV, serial #388540, design pressure full vacuum @ 100 degrees C, 2’ 9” diameter x 4’ 11” straight side, bolt dished top, weld coned bottom, mounted on lugs, (1) approx 1500 liter 316 stainless steel separator (3rd effect), manufactured by APV, serial #388550, design pressure 4.4 psi + full vacuum @ 80 degrees C, 3’ 3” diameter x 5’ 10” straight side, bolt dished top, weld coned bottom, mounted on lugs, (1) approx 4000 liter 316 stainless steel separator (4th effect), manufactured by APV, serial #388560, design pressure full vacuum @ 60 degrees C, 4’ 6” diameter x 8’ 3” straight side, bolt dished top, weld coned bottom, mounted on lugs,
Pressure: 1.03 bar (15 psi). Temperature: 90 °C (194 °F). Vacuum: Yes.