7 m3 (247.2 ft3) Stainless Steel 316L Dryer-Rotary Vacuum For Sale - IPP# 704957

Type: Dryer-Rotary Vacuum

Manufacturer: Stokes

Model: 900-59-125

Condition: Used

Material: Stainless Steel 316

Capacity Design: 7 m3 (247.2 ft3)

Diameter: 1,219 mm (48 in)

jacketed rotary vacuum dryer 3/50/380 volt Cleveland 63-55:1 ratio 3.8 HP, 1750 rpm gearbox shaft cored for steam heating, no national board, rated 50 psi @ 300 degrees F (1-straight side and 1-each end) Rotary union joint, outboard bearings. Unit with dust collector. Openings: top (2) 3' x 18 1/2" hinged access covers with counter balanced mechanism, 2-12"; end 1-8"; bottom 1-10" with manual open/close mechanism; jacket 4-6", 4-2", 4-1", 4-3/4"; shaft 1-2", 1-1 1/2".

Length: 6,096 mm (240 in). Temperature: 148.9 °C (300 °F). Shaft Cored and National Board Stamped: Yes. Orientation: Horizontal. Operational Mode: Batch. Agitation: Yes. Dust Collection: Yes. Jacket Material: Carbon Steel. Jacket Pressure: 3.4 bar (50 psi). Jacket Temperature: 148.9 °C (300 °F).

Type: Dryer-Rotary Vacuum

Manufacturer: Gebruder Lodige Maschinenbau GmbH

Model: DVT 800/2ZF

Condition: Used

Material: Stainless Steel 316L

Capacity Design: 0.9 m3 (31.8 ft3)

Capacity Working: 0.6 m3 (21.2 ft3)

jacketed rotary vacuum paddle dryer with 1.7 square meter filter (900 liter) (74 liter) max working temperature 200 degree C, 316L stainless steel chamber 790mm diameter x 1290mm straight side weld dished end with carbon steel jacket, (1) bolt dished end with carbon steel jacket, 316L stainless steel plow blades on shaft 3/50/500 volt openings: top of straight side: 1-500mm with 1.7 square meter stainless steel jacketed filter, 1-250mm, 5-25mm (jacket), bottom: 1-300mm with valve, 4-25mm (jacket) filter pressure 5 bar @ 174 degrees C (900 liter) weld dished top, carbon steel jacket, openings: top 1-100mm, straight side 1-400mm manway, jacket 2-25mm, Dryer and filter TUV certified

Diameter: 700 mm (27.6 in). Length: 1,600 mm (63 in). Height: 3,400 mm (133.9 in). Temperature: 174 °C (345.2 °F). Pressure: 5 bar (72.5 psi). Orientation: Horizontal. Agitation: Yes. Agitation Seal Type: Mechanical. Dust Collection: Yes. Jacket Material: Carbon Steel. Jacket Pressure: 8 bar (116 psi). Jacket Temperature: 174 °C (345.2 °F).

Type: Dryer-Rotary Vacuum

Manufacturer: Day Mixing Co.

Model: DS-434-1

Condition: Used

Material: Stainless Steel 316L

Capacity Design: 17 m3 (600 ft3)

Capacity Working: 12.3 m3 (434 ft3)

• With ribbon mixer 316SS wetted parts
• Vessel rated for FV/15 psi at 307 degrees F.
• Drive end head welded, opposite drive end bolted for removal. The dryer is supported by heavy duty channel legs.
• The vessel internal finish 180 grit polish in the product contact areas. Vessel nozzle schedule is as follows: One 20” top opening, One 12” bottom opening, Two 10” top openings, One 6” top for pressure relief, three 6” top sight glass assembly’s, Four 3” spares, one 2” N2 connection. Two 2” nipples on the heads for cleaning and two ¾” nipples for Thermowells.
• Spare Rotor available for additional cost. Spare rotor weighs in at 9,200 Lbs.
• Jacket Capacity by Calculation is 63.6 cubic foot/476 Gallons

Diameter: 1,829 mm (72 in). Length: 4,877 mm (192 in). Height: 3,048 mm (120 in). Temperature: 152.8 °C (307 °F). Pressure: 1.03 bar (15 psi). Orientation: Horizontal. Operational Mode: Batch. Agitation: Yes. Agitation Seal Type: Packing. Jacket Material: Carbon Steel. Jacket Pressure: 4.1 bar (60 psi). Jacket Temperature: 152.8 °C (307 °F).

Type: Dryer-Rotary Vacuum

Manufacturer: Giovanola

Condition: Used

Material: Stainless Steel 316L

Capacity Design: 2.2 m3 (77.7 ft3)

Capacity Working: 1.6 m3 (56.5 ft3)

jacketed vacuum paddle dryer system design pressure internal vacuum @ 165 degrees C (2223 liter total capacity), heating capacity internal 3.5 square meter, jackets 1.63 square meter, paddle 3.38 square meter paddle cored for heating, paddle speed 4 rpm 11 kw, 3/50/380 volt, 1450 rpm motor front hinged door with half pipe coil jacket, system includes: (1) 630 liter 316L stainless steel vertical pressure tank, internal pressure 2 bar + vacuum @ 200 degrees C, 1m diameter x 790mm straight side, weld dished top and bottom, (1) 1.6 square meter 316L stainless steel vertical jacketed dust filters, 448mm diameter x 1632mm overall height, weld dished top, weld coned bottom, half pipe coil jacket

Diameter: 1,500 mm (59.1 in). Length: 3,985 mm (156.9 in). Height: 2,950 mm (116.1 in). Temperature: 165 °C (329 °F). Heat Transfer Surface Area: 5.1 m² (55.2 ft²). Shaft Cored and National Board Stamped: Yes. Orientation: Horizontal. Operational Mode: Batch. Agitation: Yes. Dust Collection: Yes. Jacket Material: Stainless Steel Other. Jacket Pressure: 6.5 bar (94.3 psi). Jacket Temperature: 165 °C (329 °F). Jacket Type: Half Pipe/Limpet.