Quote Cart
Type: Dryer-Flaker Drum and Belt
Manufacturer: Sandvik
Condition: Used
Material: Stainless Steel Other
Flaker Width: 1,500 mm (59.1 in)
For Belt: Length of Flaker: 24,850 mm (978 in)
1.5m wide x 24.85m long
rotoform cooling conveyor/belt
Drawing Number 6530.
5m long hot water section
17.5m cooling water section
Cooling water capacity: 185 GPM @ 30 psi, Hot water zone has 16 sprays x 4 runs x 0.71 gpm (45.4 gpm), Cold water zone has 49 sprays x 4 runs x 0.71 gpm (139.1 gpm), 900mm diameter tension drum, 900mm diameter drive drum
andvik Dropformer feed unit with hot oil heated weir, chain driven by 0.75 KW, 3/50/415 volt motor via varispeed gearbox. brass knife discharge, carbon steel support frame with sump tanks mounted under the belt, Flaker includes a discharge vibratory shaker for size classifacation, (3) Sihi Centrifugal cooling water pumps, Russel Finex inline water filter,
Area of Flaker: 37 m² (398 ft²). Orientation: Horizontal. Single Belt or Double Belt ?: Single. Flaker Feed Type: Standard Drop Pastillator. Number of Cooling Zones for Belt: 4. Nozzles per Cooling Zone: 49. Scraper: Yes. Scraper Details: Discharge scraper - Brass MOC.
Type: Dryer-Flaker Drum and Belt
Manufacturer: R.Simon Dryers
Model: Stearine acid
Condition: Used
Material: Stainless Steel 316
Flaker Width: 1,538 mm (60.6 in)
Area of Flaker: 228 m² (2,454 ft²)
single drum flaker, with dip tray
working pressure 6.9 bar max, design pressure 6.9 bar @ 170 degrees C
steam heated drum with rotary unions
drum speed variable from 0.7 to 7 rpm, adjustable knife discharge with removeable plastic blades (missing)
Orientation: Horizontal.
Type: Dryer-Flaker Drum and Belt
Manufacturer: Steel Belt Systems
Condition: Used
Material: Stainless Steel 304
Flaker Width: 610 mm (24 in)
For Belt: Length of Flaker: 4,267 mm (168 in)
(2) 20” wide water cooled
Rolls are driven by a varispeed drive, one roll is 7" diameter, the other is 16" diameter
Material drops onto a stainless steel water cooled belt (similar to a Sandvick). With lump breaker on the discharge end of belt to break up cooled product
Area of Flaker: 2.6 m² (28 ft²). Orientation: Inclined. Single Belt or Double Belt ?: Single.
Type: Dryer-Flaker Drum and Belt
Manufacturer: Gunter Stenger
Condition: Used
Material: Stainless Steel 304
Flaker Width: 610 mm (24 in)
For Belt: Length of Flaker: 4,267 mm (168 in)
with (2) 20” wide water cooled
chrome plated calender rolls on the belt feed end to smooth out the hot product dropping onto the chill belt
Rolls are driven by a varispeed drive, one roll is 7" diameter, the other is 16" diameter
Material drops onto a stainless steel water cooled belt (similar to a Sandvick).
With lump breaker on the discharge end of belt to break up cooled product
Chipped product drops into a 6" SS rotary airlock valve then is pneumatically conveyed to a pre-breaker.
Area of Flaker: 2.6 m² (28 ft²). Orientation: Inclined. Single Belt or Double Belt ?: Single.