500 L (132.1 gallons) Stainless Steel 316 Dryer-Fluid Bed For Sale - IPP# 703094

Type: Dryer-Fluid Bed

Manufacturer: Calmic (William Boulton)

Model: 12874

Condition: Used

Material: Stainless Steel 316

Bowl Diameter: 609.6 mm (24 in)

Bowl Height: 330.2 mm (13 in)

25 Kg fluid bed dryer with steam heated jacket/battery flameproof motor with (1) 24" diameter x 13" deep bin Complete with socks, temperature gauge and bag vinch (manual)

Type: Dryer-Fluid Bed

Manufacturer: Arthur White

Model: AWS

Condition: Used

Material: Stainless Steel 316

Capacity: 100 L (26.4 gallons)

Pressure: 5.5 bar (80 psi)

50 Kg With 2 stainless steel bins on wheels with Davidson "M" Series fan non-flameproof motor Unit complete with bag shaker, damper pulsator, temperature gauge and socks Dryer housing is carbon steel With on/off switch Unit rated @ 100-200 lb/hr.

Temperature: 130 °C (266 °F). Bowl Diameter: 609.6 mm (24 in). Bowl Height: 355.6 mm (14 in). Orientation: Vertical. Operational Mode: Batch.

Type: Dryer-Fluid Bed

Manufacturer: Changzhou Jiafa Granulation Drying Equipment Co. LTD

Condition: Used

Material: Stainless Steel 316

1-5 kg polished and sanitary Granulator, coater, pelletizer, & dryer This is a multi function machine, makes 10-30 mesh granules. With two product hoppers. Electrically heated coil rated for 9 kW, blower fan rated for 4 kW. With controls. Set up for local air intake and exhaust. Two internal bag filters with shakers. Compressed air requirement 0.2 m3/min.

Type: Dryer-Fluid Bed

Manufacturer: Aeromatic-Fielder AG

Model: Aerocoater Model CU-4

Condition: Used

Material: Stainless Steel 316

Capacity: 240 L (63.4 gallons)

Air Flow Rate: 2,800 m3/h (1,648 CFM)

120 kg Aeromatic Fluid bed dryer/ coater Com.No. 88 91 42 Bowl volume is 240 liters System utility requirements are: Steam maximum 150 kg/h @ 6 bar g chilled water maximum 5.4 m3/hr 27 degrees C inlet temp compressed air 45 Nm3/hr @ 6 bar Motor: 3 phase Electric System accessories include a heating coil with 10 bar housing pressure for air heating, air inlet filters and cooler, 22 Kw system Fan rated for 10 bar/s, Airflow 0.25-0.83 m3/s at static pressure 10.00 pa; product filter with shaker discharge, and a bin lift system system Fan rated for 10 bar/s Airflow 0.25-0.83 m3/s at static pressure 10.00 pa product filter with shaker discharge, and a bin lift system Electrical controls available with unit

Pressure: 6 bar (87 psi). Bowl Diameter: 580 mm (22.8 in). Bowl Height: 500 mm (19.7 in). Orientation: Vertical. Product Density: 0.24 m3 (8.5 ft3). Operational Mode: Batch.