Porcupine Dryer Gale Process Solutions 1P1203 Stainless Steel 316 - IPP# 207268

Type: Dryer-Porcupine

Manufacturer: Gale Process Solutions

Model: 1P1203JTB

Condition: Used

Material: Stainless Steel 316

Shell Configuration: Trough

Operational Mode: Batch

• Agitator 12" diameter, 3' long. (18% Cr, 11% nickel)
• hot oil or steam and full vacuum
• Working volume 1.89 cubic feet
• Jacket 7.3 square feet
• (requires motor and gear drive)
• Manufactured by Gale Process Solutions (legacy Bethlehem Corporation/Advanced Thermal Solutions)

Diameter: 305 mm (12 in). Length: 914 mm (36 in). Number of Shafts: 1. Has Jacket: Yes. Jacket Surface Area: 0.678 m² (7.3 ft²). Porcupine Surface Area: 1.15 m² (12.4 ft²). Porcupine Operating Pressure: 10.3 bar (150 psi). Porcupine Operating Temperature: 343 °C (650 °F). Jacket Operating Pressure: 10.3 bar (150 psi). Jacket Operating Temperature: 343 °C (650 °F). Total Heat Transfer Surface Area: 1.86 m² (20 ft²). Total Working Volume: 0.0535 m3 (1.89 ft3). Size: 12" diameter x 36" long.

Type: Dryer-Porcupine

Subtype: Parts

Manufacturer: Gale Process Solutions

Model: 5416

Condition: Used

Material: Stainless Steel 316

Shell Configuration: Trough

Diameter: 1,372 mm (54 in)

• Spare trough Size 54-16
• Shell rated for 5 psi at 325 degrees F Capacity of trough is 213 cu.ft
• Twin rotor chamber 36" deep x 191" long
• Designed to use two screws
• Manufactured by Gale Process Solutions (legacy Bethlehem Corporation/Advanced Thermal Solutions)

Length: 4,877 mm (192 in). Number of Shafts: 2. Porcupine Operating Pressure: 5.17 bar (75 psi). Porcupine Operating Temperature: 163 °C (325 °F). Jacket Operating Pressure: 5.17 bar (75 psi). Jacket Operating Temperature: 163 °C (325 °F). Total Heat Transfer Surface Area: 64.1 m² (690 ft²).

Type: Dryer-Porcupine

Subtype: Parts

Manufacturer: Gale Process Solutions

Model: 1P1810JTB

Condition: Used

Material: Stainless Steel 316

Shell Configuration: Trough

Operational Mode: Batch

• Trough only
• Porcupine Processer Agitator 72.9 sq. ft. heating area Panel coils jacket to be applied and will add 36.6 sq. ft. of heater area
• Trough working volume is 14.9 cu. ft. per batch
• Agitator has pusher/scraper clips center discharge
• Manufactured by Gale Process Solutions (legacy Bethlehem Corporation/Advanced Thermal Solutions)

Diameter: 457 mm (18 in). Length: 3,048 mm (120 in). Number of Shafts: 1. Has Jacket: Yes. Jacket Surface Area: 3.4 m² (36.6 ft²). Porcupine Surface Area: 6.77 m² (72.9 ft²). Total Heat Transfer Surface Area: 10.2 m² (110 ft²). Size: 3018.

Type: Dryer-Porcupine

Subtype: Complete

Manufacturer: Gale Process Solutions

Model: 1P1203JTB

Condition: Unused

Material: Stainless Steel 316

Shell Configuration: Trough

Operational Mode: Batch

• Agitator 12" diameter, 3' long
• Heating medium is hot oil or steam
• Working volume 1.89 cubic feet
• Vesssel rated 15 psig and full vacuum @ 650 degree F, jacket and agitator rated 150 psig @ 650 degree F
• Agitator 12.4 square feet of heating area, jacket 7.3 square feet
• via a gearbox
• Manufactured by Gale Process Solutions (legacy Bethlehem Corporation/Advanced Thermal Solutions)

Diameter: 305 mm (12 in). Length: 914 mm (36 in). Number of Shafts: 1. Has Jacket: Yes. Jacket Surface Area: 0.678 m² (7.3 ft²). Porcupine Surface Area: 1.15 m² (12.4 ft²). Porcupine Operating Pressure: 10.3 bar (150 psi). Porcupine Operating Temperature: 343 °C (650 °F). Jacket Operating Pressure: 10.3 bar (150 psi). Jacket Operating Temperature: 343 °C (650 °F). Total Heat Transfer Surface Area: 1.83 m² (19.7 ft²).