Quote Cart
Internal finish: #4 polish-203-30 RA 10 turns 3" half pipe coil on side (0.109" wall) with jumper to 4 turns on bottom
Type: Reactor
Subtype: Batch-Type Agitated
Manufacturer: Lee Industries
Model: 1500U9MS
Condition: Used
Material: Stainless Steel 321
Capacity (Design): 11,356 L (3,000 gallons)
Internal Pressure: 2.1 bar (30 psi)
Jacketed Pressure/Vacuum Reactor with Mixer Vessel rated for MAWP 30 psi @ 275 degrees F. ,MDMT -20 degrees F @ 30 psi. Jacket rated for MAWP 100 psi @ 338 degrees F. , MDMT -20 degrees F @ 100 psi two zone, bottom and lower side. Both coils have 2" NPT inlets and outlets Agitator is single action with bottom scrapers. With Toshiba G-3 TOSVERT-130 transitor Inverter, and operating control panels
Internal Full Vacuum: Yes. Internal Temperature: 135 °C (275 °F). Jacket Pressure: 6.9 bar (100 psi). Jacket Temperature: 170 °C (338 °F). Jacket Material of Construction: Stainless Steel 321. Agitation: Yes. Diameter: 2,591 mm (102 in). Straight Side Length: 2,134 mm (84 in). Support Type: Legs.
Type: Reactor
Subtype: Batch-Type Agitated
Manufacturer: Stalwart International
Condition: New
Material: Stainless Steel 316L
Capacity (Design): 15,142 L (4,000 gallons)
Internal Pressure: 10 bar (145 psi)
NEW/UNUSED Internal finish 240 grit buff polished-Bright polished, external buff polish to a matte finish "U" stamped 10 mm thick welded dish heads (2:1) 12 mm thick Coil: 114 mm OD x 4 mm thick Limpet covers bottom dish and 2615 mm of straight side (pitch 150mm) Coil heating surface area With Insulation rings and upper drip ring. Two top lifting lugs and one tailing lug motor UL listed All nozzles have 304 SS flanges
Internal Full Vacuum: Yes. Internal Temperature: 150 °C (302 °F). Sanitary Construction: Yes. Jacket Pressure: 10 bar (145 psi). Jacket Temperature: 150 °C (302 °F). Jacket Material of Construction: Stainless Steel 304. Orientation: Vertical. Agitation: Yes. Diameter: 2,450 mm (96.5 in). Straight Side Length: 3,150 mm (124 in). Support Type: Lugs.
Type: Reactor
Subtype: Batch-Type Agitated
Manufacturer: Pfaudler
Model: P series
Condition: Used
Material: Stainless Steel 316L
Capacity (Design): 113.6 L (30 gallons)
Internal Pressure: 4.1 bar (60 psi)
Internal Full Vacuum: Yes. Internal Temperature: 176.7 °C (350 °F). Jacket Pressure: 5.9 bar (85 psi). Jacket Temperature: 176.7 °C (350 °F). Jacket Material of Construction: Carbon Steel. Orientation: Vertical. Diameter: 508 mm (20 in). Straight Side Length: 533.4 mm (21 in). Support Type: Legs.
Type: Reactor
Subtype: Batch-Type Agitated
Manufacturer: Stalwart International
Condition: New
Material: Stainless Steel 316L
Capacity (Design): 7,571 L (2,000 gallons)
Internal Pressure: 10 bar (145 psi)
NEW/UNUSED Internal finish 240 grit buff polished-Bright polished external buff polish to a matte finish 10 mm thick welded dish heads (2:1) 10mm thick Coil: 114 mm OD x 4 mm thick, Limpet covers bottom dish and 2028 mm of straight-side (pitch 150mm), Span 1000mm Coil heating surface area With Insulation rings and upper drip ring. Two top lifting lugs and one tailing lug motor UL listed All nozzles have 304 SS flanges
Internal Full Vacuum: Yes. Internal Temperature: 150 °C (302 °F). Sanitary Construction: Yes. Jacket Pressure: 10 bar (145 psi). Jacket Temperature: 150 °C (302 °F). Jacket Material of Construction: Stainless Steel 304. Orientation: Vertical. Agitation: Yes. Diameter: 2,000 mm (78.7 in). Straight Side Length: 2,400 mm (94.5 in). Support Type: Lugs.