Quote Cart
CS jacketed ribbon blender
Internal pressure rated 3 psi @ 200 deg. F to -20 deg. F min.
Jacket is rated 60 psi @ 200 deg. F to -20 deg. F min.
Blender configuration is full flat top cover with center bottom outlet.
Shaft has stuffing box, ribbon design is removable, continuous double ribbon with Teflon wipers
Shaft is driven through a Dodge shaft mounted reducer with a 24.7/1 gear reducer.
Top cover is clamp on removable design.
Top cover openings include 2-4", 1-8", 2-1", and 1 top feed/manway opening of 12"x16". Vessel is fully insulated.
Center bottom outlet is approx. 6" and discharges through a knife gate into a Young motorized 2-3 hp delumper.
Type: Mixer-Ribbon & Paddle
Manufacturer: Loedige Littleford Ploughshare
Model: KM8000
Condition: Used
Material: Stainless Steel 304
Design Capacity: 8 m3 (282.5 ft3)
Operating Capacity: 5 m3 (176.6 ft3)
continuous mixing 25,000 kg/hr 8000 liter(2113 gallon) total capacity with (2) side hatches with hinged covers and hand wheel swing bolts, (1) 16" x 24" ID top drive end charge port, (1) 16" ID vent port top center, and (1) 17" x 20" ID bottom end discharge port. Internal shaft with plows 3/60/230/460 volt 1750 rpm down to 90 rpm Weight 17,200 lbs.
Operational mode: Continuous. Ribbon Type: Plows. Length: 7,400 mm (291 in). Width: 1,750 mm (68 in). Height: 2,300 mm (90 in).
Type: Mixer-Ribbon & Paddle
Manufacturer: Sprout Waldron
Model: DA-26-12
Condition: Used
Material: Stainless Steel 304
Design Capacity: 1.13 m3 (40 ft3)
Operating Capacity: 0.85 m3 (30 ft3)
horizontal, twin paddle mixer SO # C-l6001 with 10 Gauge covers and flat top with 3 "V" belt sheeves through a Dodge single reduction torque arm. Torque arm # T-17 Capable of continuosly handling 48,000 lbs/hr.
Operational mode: Continuous. Ribbon Type: Paddles. Length: 3,650 mm (144 in). Width: 660 mm (26 in). Height: 482.6 mm (19 in).
Type: Mixer-Ribbon & Paddle
Manufacturer: Littleford Bros, Inc
Model: FKM-600-D
Condition: Used
Material: Stainless Steel 304
Design Capacity: 0.79 m3 (28 ft3)
Vessel Pressure: -0.97 bar (-14 psi)
Jacket Temperature: -16.1 °C (3 °F). Jacket Pressure: 0.48 bar (7 psi). Jacket Type: Standard. Operational mode: Batch. Paddle/Ribbon MOC: Stainless Steel 304. Agitation Shaft Sealing: Packing. Length: 1,200 mm (48 in). Width: 914 mm (36 in). Height: 914 mm (36 in).
Type: Mixer-Ribbon & Paddle
Model: U-700
Condition: Used
Material: Stainless Steel 304
Design Capacity: 1.5 m3 (53 ft3)
Operating Capacity: 1 m3 (35.3 ft3)
stainless steel ribbon blender. Chamber 60" long x 38" wide x 51" deep, Packing glands. Bolt flat top w/17" x 12" hinged manway. Openings: top 3-9"; btm 1-5" w/valve. worm and worm wheel.
Ribbon Type: Interrupted ribbon. Agitation Shaft Sealing: Packing. Length: 1,500 mm (60 in). Width: 965 mm (38 in). Height: 1,300 mm (51 in).