Stainless Steel 304 Paul O Abbe 18RCVD Dryer-Twin Shell & Double Cone - IPP# 92913

Type: Dryer-Twin Shell & Double Cone

Manufacturer: Paul O Abbe

Condition: Used

Material: Stainless Steel 304

Capacity Design: 0.708 m3 (25 ft3)

Capacity Operating: 0.566 m3 (20 ft3)

• jacket with sheet metal covering insulation.
• vacuum arm with packing gland
• 14" diameter charge port (no cover) and an 8" discharge with a manual butterfly valve.
• Dryer shell has outboard pillow block bearings
• 220/440 volt With electric brake Has rotary joint for jacket.
• Suitable for hot oil or water

Type: Dryer-Twin Shell & Double Cone

Manufacturer: Paul O Abbe

Condition: Used

Material: Stainless Steel 316

Capacity Design: 2.83 m3 (100 ft3)

Capacity Operating: 2.12 m3 (75 ft3)

60 degree cones,
insulated with 321SS shroud over insulation
18" charge port with cover

Type: Dryer-Twin Shell & Double Cone

Condition: Unused

Material: Stainless Steel 304

Capacity Design: 0.283 m3 (10 ft3)

Capacity Operating: 0.187 m3 (6.6 ft3)

doors for a PK dryer.
21" diameter by 1/8" thick, 2 have clamps.
Each door has a five inch opening and a 1.25" sanitary connection.
Three doors are available.

Type: Dryer-Twin Shell & Double Cone

Manufacturer: Patterson Kelly

Condition: Used

Material: Stainless Steel 304

Capacity Design: 0.566 m3 (20 ft3)

Capacity Operating: 0.368 m3 (13 ft3)

Shell rated full vac @ 200 deg F
3/60/220/440 volt
chain and sprocket drive
12" feed port
6" discharge

Vessel Pressure: -0.0689 bar (-1 psi). Vessel Temperature: 93.3 °C (200 °F). Jacket Pressure: 1.03 bar (15 psi). Jacket Temperature: 93.3 °C (200 °F). Full Vacuum: Yes. Product Density: 1.67 m3 (59 ft3).