Heat Transfer & Thermal Processing - Used and Surplus Inventory | IPP

tube pressure rated by -1/10bar @-10/200 degrees C (volume 66 liter), shell pressure rated by -1/10bar @ -10/200 degrees C (volume 180 liter). Tubes alpha silicon carbide. Length: 4,800 mm. Shell-side Passes: 1. Tube-side Passes: 1. Tube Type: Straight Tube. Tube Number: 121. Tube Diameter: 14 mm. Tube Length: 4,200 mm. Tube Thickness: 1.5 mm. Nozzle Schedule: shell side: (1) DN100, (2) DN200, (1) DN300; tube side: (1) DN150, (1) DN200. Capacity: 246 L. Heat Exchanger Tube Capacity: 66 L.

Rated FV/300 psi @ -20 to 425 degrees tube side; FV/50 psi @ -20 to 425 degrees F shell side.
with glass lined clamped heads Tube Number: 18. Tube Diameter: 0.75 in. Tube Length: 216 in.

standard 6' diameter bucket with 18" diameter manway and 8" diameter outlet with 9 to 45 rpm on bucket with Hastelloy vacuum arm with stuffing box. With bull and pinion Reconditioned gear box, driven by 3HP XP class 1, div 2 , 3 phase, 60HZ, 230, 460 Volt motor with electric 10 ft-lbs. brake.

internal pressure -1/1 bar @ -10/200 deg C (4310ltr), jacket 6 bar @ -10/200 deg C (480ltr) 1m high top and bottom cones gear driven by a vari-speed drive 3/50/300/660 volt Hastelloy vacuum arm, mechanical seal, rotary union joint top cone with 1-450mm manway, bottom cone with 1-250mm discharge with valve (1) s/steel plate heat exchanger, 70 kw, pressure 16 bar @ 150 deg C (1) 8-28 m3/hr c/steel centrifugal pump, 14.5-9.5m hd,

• 130 gal (500 liter), Open top, dish bottom. No bottom outlet.

1000 liter, jacketed double Cone Vacuum Dryer Blender with Hastelloy vacuum arm;

geared motor;

Body rotation speed range: 1.65 – 10 rpm;

Complete with stuffing box seal, and rotary Joint.11

15 liter capacity in body and 193 liter capacity in jacket; 3/50/220/380 volt

(48) 1" OD welded tubes. (2) Glass lined heads. Tube Diameter: 1 in.

• 4" diameter
• 47 Sq FT Heated Area.
• Bucket weight 2,000 lbs.
• 18" Manhole, shell thickness 3/8"

Rated 300/FV @ -20 to 425 degrees tube side; FV/50 psi @- 20 to 425 degrees F shell side. clamped heads Tube Number: 18. Tube Diameter: 0.75 in. Tube Length: 216 in.

Tantalum lined carbon steel tube sheets TUV APPROVED Pressure tube side -1/4 bar @ 170 degrees C (volume 122 liter), pressure shell side 4 bar @ -17/40 degrees C (volume 225 liter) Expansion joint manufactured by DeDietrich, serial number 27031, internal pressure rated -1/4 bar @ 170 degrees C (volume 67 liter), openings (1) DN80 and (1) DN150, second head: manufactured by DeDietrich, serial number 27030, internal pressure rated -1/4 bar @ 170 degrees C (volume 82 liter), openings (1) DN80 and (1) DN250 Tube Type: Straight Tube. Tube Number: 179. Tube Diameter: 19.5 mm. Tube Length: 2,600 mm. Nozzle Schedule: - Openings: (1) DN40, (2) DN100, (1) DN150.

Estimated 10 CFM wet venturi scrubbing system suitable for acidic products. Skid mount system featuring on board Explosion Proof controls, and a Magnetic drive recirculation pump. Skid contains the following equipment: One-20 Gallon, glass lined, vertical, clamp top tank fitted with a venturi nozzle. Manufactured by Ceramic Coatings, serial # 6-39887, NB # 1425, rated for 150 psi at 450 degrees F. One- Iwaki mag drive pump model # MX-401, size 1.5" x 1.5", rated for 25 GPM at 50 ft./hd.,with a 3.66" diameter impeller, and direct driven by a Baldor 1 hp motor rated for 3450 rpm. Pump and vessel include all piping and valves to complete system. On board controls and instrumentation include level indication, flow and suction pressure. Controls rated for Class I, Group C & D, Class II, Groups E,F & G.

• Feed stock up to 33 GPM Aquesos waste
• Individual Components:
• IPP #233138: 18" diameter packed column, fabricated from C-22
• IPP #233139 and 233140: 16 Sq. Ft., Hastelloy C-276 Plate and frame heaters
• IPP #233141: 639 Sq. Ft., Asthenic Stainless Steel shell and tube heater
• IPP #233142: 6,500 GPM Hastelloy elbow recirculation pump
• IPP #233143: 5,000 Gallon, glass lined recirculation tank
• IPP #233455: 169 Sq. Ft., 316 SS vertical shell and tube heat exchanger
• IPP #233454: 484 Sq. Ft., 316 SS shell and tube condenser
• IPP #233146: 12,000 Gallon, 304 SS, vertical storage tank
• IPP #233496: 24" column, 316 SS Alloy Fab, 270" overall length.

Head coating: Ceramic coating glass lined Shell: 60 PSI @ 350 degrees F Tube: 60 PSI @ 350 degrees F

lyophilizer. System has (2) heresite lined chambers, each 340 sq ft w/(17) 60" x 48" shelves, 3-11/16" clearance between shelves. Both chambers are rated 15 psi/full vac @ 350 deg F. 375" thick shell, 2.125" thick door. Hinged front door w/(3) glass ports. Refrigeration and heating system data: shelf temp range -55 deg C to 75 deg C. Shelf heating is 40 KW per TCE system (Trichloroethylene). (1) condenser for both chambers, 405 sq ft, 800 liter holding capacity, SS condensing plates. Shelf refrigeration system has (2) 7.5 HP compressors. Condenser refrigeration skid has (4) 30 HP reciprocating compressors. Vac system includes (2) 7 1/2 HP Stokes oil seal vac pumps, pump down time to 100 microns is 15 minutes. All electricals are 3/60/460 volt, 385 amps.

Devine vinyl coated shelf dryer Shelf temperature estimated ~212° F Unit has (16) coated cored shelves, 58" wide x 79" long on 3" spacing. Cast Iron housing with internal coating, Ceilcoat Flakeline 2226F, hinged doors on the front and back of chamber, Each door has 6" sight glasses on the doors. Swing bolt closers on the doors.

glass spiral tube heat exchanger DIN150

25 PSI with FV internal. 6 Ft diameter body. Bull and pinion gear 230/460 volt gear head motor with electric brake 5 rpm rotation for a 1.08 rpm bucket rotation.
Mechanical seal on shaft, Hastelloy 276-C vacuum arm. 18" carge prort with cover Unit includes a SS load platform, with the platform mounted on hydraulic cylinders that lift the platform out of the way during dryer cycle.

Mfd by Balfour/Sybron Order #48621 Lined w/glass #3115 CS jkt 98 psi @ 392 deg F Has glass covered int rotor w/graphite wipers. Retaining pins and rotor shaft are titanium. jkt body section, 48" dia x 9'10" str side; and clamp jkt cone btm.Has 3-sections: clamped dish entrainment section, 48" dia x 42" str side; jkt body section, 48" dia x 9'10" str side; and clamp jkt cone btm.

Drive is Pfaudler Type VS80-U21983, belt driven by approx 10 HP motor w/mech seal on shaft.

glass 3113 Dryer body 2100 mm diameter x 1200 mm conical sections Jacket volume: 440 liter with gear reducer With 450 mm manway Jacket's heat transfer area: 13.4 square meters

pressure tube side: -1/4 bar @ 170 degrees C (volume 23 liter), pressure shell side: 4 bar @ -17/40 degrees C (volume 82 liter) outside diameter:19,5mm x 3404mm length, wall thickness: 0,04mm with (2) glass lined steel heads, first head: manufactured by DeDietrich, serial number 27028, pressure -1/4 bar @ 170 degrees C (volume 9 liter), second head: manufactured by DeDietrich, serial number 27029, pressure -1/4 bar @ 170 degrees C (volume 9 liter) Tube Thickness: 0.04 mm. Nozzle Schedule: - Openings: - (4) DN80/PN10 - (2) DN200/PN10 - (2) DN100/PN16 - (1) DN40/PN16 - (1) DN150/PN16.

25 PSI with FV internal Bull and pinion gear 230/460 volt gear head motor with electric brake 5 rpm rotation for a 1.08 rpm bucket rotation.
Mechanical seal on shaft, Hastelloy 276-C vacuum arm. 18" carge prort with cover Unit includes a SS load platform, with the platform mounted on hydraulic cylinders that lift the platform out of the way during dryer cycle.

45 PSI with FV internal. 6 Ft diameter body Bull and pinion gear 230/460 volt gear head motor with electric brake 5 rpm rotation for a 1.08 rpm bucket rotation.
Mechanical seal on shaft, Hastelloy 276-C vacuum arm. 18" carge prort with cover Unit includes a SS load platform, with the platform mounted on hydraulic cylinders that lift the platform out of the way during dryer cycle.

QVF glass spiral tube heat exchanger DIN150

45 PSI with FV internal. 6 Ft diameter body. Bull and pinion gear 230/460 volt gear head motor with electric brake 5 rpm rotation for a 1.08 rpm bucket rotation.
Mechanical seal on shaft, Hastelloy 276-C vacuum arm. 18" carge prort with cover Unit includes a SS load platform, with the platform mounted on hydraulic cylinders that lift the platform out of the way during dryer cycle.

45 PSI with FV internal. 6 Ft diameter body. Bull and pinion gear 230/460 volt gear head motor with electric brake, 5 rpm rotation for a 1.08 rpm bucket rotation Mechanical seal on shaft 18" carge prort with cover, Unit includes a SS load platform, with the platform mounted on hydraulic cylinders that lift the pltform out of the way during dryer cycle.