Double Drum Dryer

With vacuum housing and vacuum skid

Chrome plated carbon steel drums with 304 stainless steel, jacketed vacuum housing

Sanitary and polished construction suitable for food and pharmaceuticals but can be used for any batch processes, or converted to a continuous process.

Drum rolls have a 16 micro-inch finish, all internals have a 32 micro-inch finish

External finish is 2B or bead blast

Vacuum housing is rated to operate at full vacuum

Drums are rated for 160psi/FV @ 375 degrees F (NB# 9918 and NB# 9919)

Designed for use in class 1 division 2 atmospheres

1287 lbs./hr. of H2O and Ethanol

utilizing a 3.8 to 4.6 lbs./hr./ft2 evaporation rate

Spring loaded screw type manual adjustment assemblies with digital drum gap display

Pneumatic cylinder adjustable 304 stainless steel knife bars with clamp and acme thumb fasteners and pneumatically operated stainless steel end scrapers

8 zone steam jackets rated for 160 psi at 375 degrees F

(4) 6” tri-clamp top chamber inlets, (4) 4” tri-clamp product feed inlets, (2) 14” 150lb ANSI flange vapor outlets

(14) 1/2” NPT hot water jacket nozzles, (2) 1.5” NPT hot water jacket nozzles, (6) 4” tri-clamp internal drains, (10) 4” tri-clamp light ports

The Vacuum system is rated for 140 CFM, and is 304 SS contact, capable of handling 1,340 lbs./Hr. of vapor rate

Manufactured by Wintek Corp

Model # C380R50-WSS-=140/2-1FRss, serial # 140321

The skid mount system contains the following equipment: One-(1) 380 square foot, 304 SS contact, shell and tube pre condenser

TEMA C AEL, requires 180 GPM of cooling water at 50 degrees F

One-(1) Non code 304 SS 50-gallon receiver, with condensate pump

One-(1) Vacuum pump, SS wetted side, manufactured by Dekker, rated for 140 CFM, direct driven by a WEG 10 HP motor at 1750 rpm

One -(1) separator tank, non-code 304 SS, approximately 10 gallons

One- (1) Sealant heat exchanger, non-code, plate and frame, SS process side, requires 10 GPM cooling water at 50 degrees F

All equipment mounted in a CS frame work with ss interconnecting piping

The control system is a free standing Panel View Plus 1000 in a nitrogen purged enclosure good for Class 1,Division 2, Group D

It is located local to the machine, but will also send a signal to a remote control room

Located outside the classified area are the motor VFD, and electrical controls

cast iron R Simon single drum dryer Dryer includes (3) + (1) 316SS 9" feed rolls working pressure 3 bar (6 bar tested) w/(2) pneumatic and (1) manual operated feed roll scrapers Scraper knifes mfd form tufnol bear brand material Pneumatically operated (non-oscillating) cast iron knife bar Knife mfd in cast steel Motor: 28 amps variable speed gearbox Radicon reduction gearbox SS paddle conveyor w/inspection panels powered by 1.5 KW geared motor Unit can be supplied w/pneumatically operated traversing gear if required Control panel consisting of all pneumatic controls and electrical timers for feed roll scrapers Was rebuilt

single drum dip feed dryer M/C #4586 Drum cored for steam heating (2-50mm openings) Speed 1 to 6 rpm Drum totally enclosed in 316 stainless steel chamber Motor: non-flameproof motor Drum with monel adjustable stainless steel knife/scrapper Dip tray 1522mm long x 736mm wide Openings: 2-50mm, 1-25mm; hood with 1-300mm, 2-100mm. All wetted parts 316 stainless steel. (3) 400mm long x 300mm wide inspection covers.

single drum dryer Drum driven by 12 KW motor and reducer Cored drum Packing gland on shaft Outboard bearings Dual knife discharge, manual knife adjustment into 8" dia screw conveyor

double drum dryer with chrome plated rolls .008 to .010 chrome plating on drum surface 75 rockwell hardness drum Serial #17107 2 1/2" rotary steam joint Includes SS fume hood

Equipped with a jacketed bath Sprocket driven hydraulic adjustable discharge knife

single drum dip feed dryer Drum cored for steam heating Manual knife discharge Has 15" x 19" CS jkt feed pan 3/60/230/460 volt, rated 44 rpm max, 8.8 rpm min

total face cast iron single drum dryer drum manufactured by Black Clawson serial #10062/4130, S.H 51mm, H.D 76mm, H.D.R 2362mm drum cored for steam heating (4) cast iron applicator feed rolls (1) Cast steel knife, gear driven drum motor missing Cooper bearings

cast iron drum for dryer Blt for working pressure of 10 bars

1.5m OD x 3.5m long cast iron dryer/flaker drum W/end and shaft Design pressure 147 psi (10 bar), steam pressure 357 deg F

drum for dryer Blt for working pressure of 10 bars

chrome plated drum dryer Single drum dryer varispeed motor (4) applicator rolls, manually adjustable Drum gear driven (no motor). Openings: drum 1-87mm, 1-19mm

cast iron dryer/flaker drum W/end and shaft For drum dryer

UNUSED cast iron dryer/flaker drum W/end and shaft

cast iron drum for dryer Blt for working pressure of 10 bars

cast iron dryer/flaker drum W/end and shaft For drum dryer Design pressure 147 psi (10 bar), steam pressure 357 deg F

chrome plated single drum dryer Has jkt feed pan Belt driven by US varidrive Motor: 3 phase 3/60/230/460 volt, 5.4 rpm min 54 rpm max Has hood 12" x 30" side access panel Has 8" x 8" discharge w/chute and manual slide design gate valve