New and Used Equipment

Nash SC2SS Vacuum pump, with vapor recovery system Test # 90Y002 The system includes the following equipment; a vacuum pump, two heat exchangers, a separating tank, and seal pots. The direct drive vacuum pump, is manufactured by Nash, size SC2SS, Pos. 4 ,Vac, rated 200 cfm @ 5-20" Hg. The vapor exchanger is a 30 sq. ft., all 316 SS, horizontal heat exchanger manufactured by Industrial Process Equipment corp., Model # 2ST8-60, Serial # 105-641A National Board # 988 It’s shell and tubes are rated for 150/FV The condensate chiller is a 10 sq.ft., 316SS tube bundle, 316SS heads, with CS shell, horizontal heat exchanger and is also manufactured by Industrial Process Equipment Corporation. Serial # 1056413, and National Board # 989, Rated for 150/FV psi in the shell and tubes. The dual seal pot arrangement, with Nitrogen purge is provided by Duramettalic, Canada/Condex Heat Transfer Corp. Serial # 91-3-4146 & 4179, and rated for 400 psi at 400 degrees F. Both have level sight glasses and N2 purge line with regulator and Liquid make up valves. The units 316 SS separator, is manufactured by Jenco, Serial # 91-1327, National Board # 525, and rated for 30/FV at 350 psi. The separator tank also has a liquid level sight glass. The vapor inlet line is 4" flanged, and separator outlet is 1”. Automatic valves for liquid flow control are provided by Fisher and El-O-Matic, and the vapor contact piping is 316 SS. System includes all DP cells, RTD temperature probes, and pressure gauges. Designed to be used in a hazardous atmosphere, skid has a 60 amp Square D breaker, and explosion proof switches and controls.

multi-pass tube side (2) 316L stainless steel bonnet heads Tube Length: 6,100 mm. Nozzle Schedule: openings tube side: 1 head with 2-50mm each with an 18mm off shoot, 1 head with 2-18mm, shell: 1-75mm with (2) 18mm off shoots, 1-75mm.

Pfaudler Thermal fluid (oil) loop system, all mounted inside a cabinet with pressure gauges, system consists of (1) HMD Magnetic drive centrifugal pump, manufactured by HMD Sealless Pumps Ltd, driven by 5.5 kw, 3/50/415 volt, 2900 rpm motor, (1) 60 liter electric heated tank, manufactured by Pfaudler Balfour, serial #500019, design pressure 10 barg @ 20/200 degrees C, electric heater manufactured by Heatex Ltd, serial #991433, 50kw, 3 phase, 415 volt, EEx d 11C T3, (2) stainless steel plate and shell heat exchangers, manufactured by Vahterus Oy, type PSHE-3HH80/1/1-HE-101 & PSHE-3HH60/1/1-HE-100, serial #6532 & #6531, design pressure on both sides 25 bar @ 200 degrees C, (1) 325 liter horizontal header tank, manufactured by Pfaudler-Balfour, serial #500019, design pressure 10 barg @ 20/200 degrees C, (1) 20 liter vertical tank, manufactured by Pfaudler-Balfour, serial #500019, design pressure 10 barg @ 20/200 degrees C, all items insulated

5.6 lb/hour 3340 BHP Suction pressure 273 psi Differential pressure is 429 psi. Rated for the following: Temperature 111 degrees F., Specific Gravity 0.992, Has heat exchangers and pump for cooling oil to the bearings on its shaft. .
No motor.

450mm diameter Liquid/Liquid separator system, designed for separating oil and solvents manufactured by Ott AG, with a stainless steel cyclone separator, openings: on the top (1) 35mm, (1), 45mm, (1) 65mm, (1) DN 100, on the side (1) DN50, (1) DN150 with sight glass, with (2) horizontal stainless steel stripper tanks built 1978 manufactured by EDAK, first tank, serial number 2040/1 rated @ 2 bar by 200 degrees C, volume 200 liter, openings: (1) 35mm, (1) 65mm, (2) 100mm, (1) DN 150 with sight glass, second tank, serial number 2040/2 rated @ 2 bar by 200 degrees C, volume 250 liter, openings: (1) 35mm, (1) 65mm, (2) 100mm, (1) DN 200 with sight glass, with (3) Plate heat exchangers manufactured by Ott, first heat exchanger with 18 plates, second heat exchanger with 19 plates, third heat exchanger with 27 plates, with a centrifugal pump manufactured by Fristan, type FP732/155L, serial number 32121533 driven by a 4,6kW electrical motor manufactured by Loher, type EA132S1A-2, serial number 8475071, 3~/50Hz/380V @ 2915rpm. Originally used to seperate Heptane and Oil. All Stainless Steel construction.

• APOVAC system skid mounted.

• 80 CFM 2.2 GPM with a Sulzer Burkhardt Vacuum Pump, typically contains two heat exchangers and a receiver.

• All on a skid mounted system.

• Can be used with the following IPP stock numbers: 247646, 247146, 247050, 209158, 230453, 705428, 706865, 248105, & 247051

• Receiver is 316 L SS, 20 Gallon, 18" diameter x 18" straight side, rated for FV/60 psi at 248 degrees F.

• Heat exchanger serial # W8788C, 10 Sq. Ft., 316L SS tubes, tube sheets, heads and shell. Shell rated for FV90 psi at 248 Degrees F., tubes rated for FV 60 psi at 248 degrees F.

  31 straight tubes, 0.75" diameter x 18 GA x 22" long.

• Heat exchanger, serial # W8788B, 202 Sq.Ft. 316L SS tubes, tube sheets, heads and shell. Shell rated for FV90 psi at 248 Degrees F., tubes rated for FV 60 psi at 248 degrees F.

  31 Straight tubes, 1" diameter x0.065" x 25" long.

tube side pressure: 14 bar@ 20/220°C (610 liter), shell: 8 bar@ 20/220°C (410 liter) evaporator is made up of (2) vertical heat exchangers joined together, 1st section 60 square meter with (1121) 12mm diameter x 1.5mm x 1.5m long 316L stainless steel tubes, 2nd section 191 square meter with (1121) 12mm diameter x 1.5mm x 4.5m long 316L stainless steel tubes, (2) expansion bellows, (2) 316L stainless steel coned heads (bottom with a jacket), Nozzle Schedule: openings tube side: top head with 1-300mm, bottom head with 1-100, 2-15mm (jacket), shell: 1-300mm, 1-250mm, 2-50mm,.

• Plate Belt dryer with polymerizer. 91'10"L x 14' 7"W x 7'10" H.
• Heated via 19 Air Fin Heat Exchangers, 4x 13,600CFM, 25HP Blowers and 14x 6,800CFM, 20HP Blowers.

multi-effect WFI stills system the Finn Aqua Multiple Effect Water Stills uses an enhanced falling film evaporation technology that removes impurities at high velocities, delivering the highest quality water for injection. the Multiple Effect Water Still uses a staged evaporation and condensation process to produce water for injection. Plant steam is applied only to the first column evaporator (effect) with the subsequent columns using the steam produced in the previous column as the source of energy. Similarly, cooling water is applied only at the condenser to condense pure steam into water for injection. The columns subsequent to the first column use feed water as the cooling source, which is evaporated, as the pure steam from the preceding column is condensed producing water for injection. Produced distillate and remaining pure steam is condensed in the condenser and flowing further to the plant’s water for injection tank. system consists of (5) ) 316L stainless steel (1.4404/1.4571) vertical heat exchangers, pressure 8 bar @ 175 deg C (9.7ltr), (1) 200ltr 316L stainless steel (1.4404/1.4571) tube, head and shell horizontal condenser, pressure 2 bar @ 133 deg C, driven by a 3 kW 2900 rpm motor, (5) stainless steel Pall Filters, (1) 2500 liter 316L stainless steel (1.4571 ) vertical pressure tank with half pipe coil, pressure -1/6 bar @ 200 deg C, 1.8m diameter x 1.5m straight side,

nozzle type spray dryer system with integrated fluid bed, directly heated with heat recovering, 45% DS feed, product is a micro Granulate, spray nozzle feed (unavailable)dryer directly heated by gas burner, bottom of the dryer has an integrated fluid bed with rotary lock valve,(1) 3.2 m3/hour stainless steel Feluwa feed pump, pressure 120 bar, (2) 21,000 liter stainless steel cyclones, manufactured by Niro, pressure 1 bar @ 120 degrees C, each with a rotary lock valve, (1) Stainless steel pre-cyclone, manufactured by Niro, pressure 1.01 bar @ 120 degrees C, with 2-rotary lock valves, (1) 54000 Nm3/hour stainless steel main blower/fan, manufactured by Niro, fabrik #F388334/1, pressure 1.03 bar @ 120 degrees C, driven by 170 kW, 1490 rpm motor,2) 0.8 m3/hr. twin screw coolers, manufactured by Engelmann, driven by 3kw motor, stainless steel fresh air blower, manufactured by Niro, driven by 7.5kw motor with air filter, (1) 13 square meter stainless steel heat exchanger, manufactured by Niro, pressure 1.04 bar @ 800/250 degrees C, (2) 105,000 liter Aluminum silos, manufactured by Buhler, 3m diameter, pressure 1.03 bar @ 20 degrees C, each with a dust filter mounted on top, (1) stainless steel wet scrubber system which includes (1) 50,000 liter stainless steel vertical Scrubber, pressure 1.03 bar @ 120/40 degrees C, 2.8m diameter, 90kw motor, (2) 78.2 square meter stainless steel plate heat exchangers, manufactured by GEA, pressure 3 bar @ 40/20 degrees C, (2) 265 m3/hour stainless steel centrifugal pumps, driven by 17.5kw motor, (1) 1500 liter vertical separator tank, manufactured by Niro, 2m diameter, pressure 1.03 bar @ 40 degrees C, and other ancillaries ,other ancillaries, dryer system also includes other minor ancillaries such as valves, flow meters etc.

shell with expansion bellows, 2150mm overall length Length: 1,500 mm. Shell-side Passes: 1. Tube-side Passes: 1. Tube Type: Straight Tube. Tube Diameter: 19.1 mm. Tube Length: 1,500 mm. Tube Thickness: 1.65 mm. Nozzle Schedule: top head with 1-100mm, bottom head with 1-50mm, shell with 2-100mm,.

Single-effect evaporator. With (2x) 316SS heat exchangers Manufactured by Arnold.

Temperature control module, manufactured by Budzar and others. Designed by Smith-Kline. Used to regulate the temperature in the jackets of the vessels. Each unit is a modular skid mounted system containing the following: Expansion vessel-90 Gallon 304 SS, manufactured by John Woods or others. Rated for FV/150 psi at 450 degrees F.NB & serial # 92547. Heat exchangers- Alfa Laval, copper brazed, with 100 sq.ft surface area. Jaggi Bern-70 Sq.Ft. 304/CS shell and tube heat exchanger. Sundyne Kontro, 100 GPM at 125 ft.hd.,316 SS, mag-drive, seal less horizontal centrifugal pump 1.5 x 3, driven by a 10 HP AC motor.

1 316 stainless steel flat bonnet head 1-carbon steel flat bonnet head Tube Number: 140. Tube Diameter: 19 mm. Tube Length: 3,000 mm. Nozzle Schedule: - Openings: - Tubeside: 1-head with 2-100mm - Shell: 2-75mm, 1-50mm.

• This is a complete system with two knock out pots, two vacuum pumps, two seal pots and two heat exchangers, all mounted on a CS framework.
• Vacuum pumps rated for 120 mmbar ABS
• VS2550 A & B -Seal liquid Tanks, CS construction 70 gallon vertical, rated for 125 psi at 300 degrees F. 24" diameter x 60" straight side with welded dish heads.
• VS2550 C & D Seal Liquid surge drum, 316 SS 11 gallon vertical. Rated for FV 30 psi at 300 degrees F. 14" diameter x 26" straight side with welded dish heads.
• HX 2550 A & B Parallel mounted plate and frame heat exchangers. (seal cooling)19 Sq. Ft., CS Frame 316 SS plates, hot and cold side rated for FV/125 psi at 150 degrees F. Duty 48,000 btu's.

Temperature Control unit, skid mounted used to control Glycol flow and temperature to reactor jackets. Includes all automatic valves, block valves and piping. Pumping capacity is maximum 100 gpm at 100 ft./hd. And is provided by a Goulds, CS, vertical pump. Model 3996 ST. Size is 1.50 x 2-6, maximum pressure is 280 psi. Driven by a 7.5 hp at 3485 rpm motor, 230/460 volt, 20/10.4 amp, 60 hz. 3 ph. Heat transfer is by Dual Grahm, Heli Flow, Model 12XF-18S, Serial #98-33452-1, exchangers. Steam feed to exchangers is 2” pipe.

Temperature Control unit, skid mounted used to control Glycol flow and temperature to reactor jackets. Includes all automatic valves, block valves and piping. Pumping capacity is maximum 100 gpm at 100 ft./hd. And is provided by a Goulds, CS, vertical pump. Model 3996 ST. Size is 1.50 x 2-6, maximum pressure is 280 psi. Driven by a 7.5 hp at 3485 rpm motor, 230/460 volt, 20/10.4 amp, 60 hz. 3 ph. Heat transfer is by Dual Grahm, Heli Flow, Model 12XF-18S, Serial #98-33452-1, exchangers. Steam feed to exchangers is 2” pipe.

product contact, MF,UF, RO system Design parameters of the MF system feed flow is ~ 6.5 Kl./hr. with a permeate flow of ~6.0 Kl./Hr. Bleed out(reject) rate is 0.5 Kl./Hr Design parameters of the UF system, 10 kg/cm2 operating pressure, 6-12 degrees C temperature, feed flow is ~ 6.0 Kl./hr., with a permeate flow of ~4.5 Kl./Hr. Bleed out(reject) rate is 1.5 Kl./Hr. Design parameters of the RO system are as follows:40 bar(max) operating pressure, 6-12 degrees C. temperature, feed flow is ~ 1.5 Kl./hr., with a permeate flow of ~0.9 Kl./Hr. Bleed out(reject) rate is 0.6 Kl./Hr Designed for CIP and sanitizing steaming System contains pressure vessels, tanks, heat exchangers and pumps with interconnecting piping Skid mounted with electronic PLC controls

water evaporation rate @5 lbs./Hr. per Sq. Ft. of surface area Fiberglass double effect falling film evaporation system Designed to operate with corrosive conditions The system includes the following major components: Heaters, Vapor bodies, Vacuum system, Pumps, and major pieces of interconnecting piping All the major pieces of the system have individual stock numbers IPP # 233941 2000 Gallon fiberglass vapor body IPP # - 233944-1900 gallon Fiberglass vapor body IPP# 233942 2000 Sq. Ft. Graphite heater IPP # 233943 1272 Sq.Ft., Titanium heater IPP # -233945 and 233946 small graphite heat exchangers IPP# 233947, 233948, and 233951 Graphite heat exchagers IPP # 233956 and 233957, Titanium centrifugal pumps, IPP # 233958, 233959, and 233960 Teflon lined pumps

• Mettler Toledo HMI with Automation Direct Productivity 2000, in a SS NEMA type 4 enclosure (UL Listed).
• Skid includes heat exchangers: 5 Sq. Ft., NB # 79171, manufactured by ITT both sides rated for 150 psi at 375 degrees F. Also included, Allegany Bradford, serial # 8553-21-2 (built 2001) Both sides rated for 100 psi at 300 degrees F.
• Skid includes a vertical recirculation pump manufactured by Grundfos. 7.5 HP with Allen Bradley VFD mounted in a separate NEMA enclosure. (480 V, 3 phase, 60 Hz)
• Designed for product specific Gravity of 1.1
• Estimated weight is for vessel only-Not for skid. Support Type: Skid.

5400 SYSTEM CONSISTING OF COLUMNS, HEAT EXCHANGERS, PUMPS, DRUMS ETC

BUTYLACETATE SYSTEM 4200/4300 SYSTEMS-CONSISTS OF MISC COLUMNS, HEAT EXCHANGERS, PUMPS, DRUMS ETC

Temperature Control unit, skid mounted used to control Glycol flow and temperature to reactor jackets. Includes all automatic valves, block valves and piping. Pumping capacity is maximum 100 gpm at 100 ft./hd. And is provided by a Goulds, CS, vertical pump. Model 3996 ST. Size is 1.50 x 2-6, maximum pressure is 280 psi. Driven by a 7.5 hp at 3485 rpm motor, 230/460 volt, 20/10.4 amp, 60 hz. 3 ph. Heat transfer is by dual Grahm, Heli Flow, Model 12XF-18S, Serial #98-33452-1, exchangers. Steam feed to exchangers is 2” pipe.