Rosenmund and Cogiem Filter APOVAC Unit - IPP# 248331

Type: Filter

Subtype: Rosenmund and Cogiem

Manufacturer: Rosenmund AG

Model: RPD-12-810-94

Condition: Used

Material: Stainless Steel 316L

Filtration Area: 12 m² (129.2 ft²)

Diameter: 4,000 mm (157.5 in)

• agitated pressure Nutsche filter,
• design pressure internal -1/3.2 bar @ -10/200 degrees C (22400 liter),
• jacket -1/10 bar @ -10/200 degrees C (170 liter),
• filter base jacket 6 bar @ -10/200 degrees C (407 liter)
• 6000 liter nominal cake volume
• 500mm cake height
• fixed bed design with 316L stainless steel filter mech
• center bottom discharge via plunger that runs down the center of the shaft,
• shaft driven by 37/42kw 3/50-60/690-400/660-380/415-440 volt 1480/1478/1482/1778 rpm EEx de IIB T4 ATEX motor via a 253.356:1 ratio reduction gearbox,
• Packed gland
• shaft speed 2.7-8.2 rpm,
• shaft with Hydraulic raise/lower mechanism, driven by a hydraulic power pack with 2.2kw, 3/50/380 volt, 1500 rpm EEx de IICT4 motor,
• internal wash ring/spray bar,
• side inspection manway with cover and davit,

(1) centrifugal pump, driven by 11/12.5kW 3/50-60/690-400/660-380/415-440 volt, 2936/2929/2942/3526 rpm, EEx de IIB T4 ATEX motor, mounted on a baseplate

Pressure: 3.2 bar (46.4 psi). Temperature: 200 °C (392 °F). Vacuum: Yes. Agitation Seal Type: Packing. Jacket: Yes. Jacket Pressure: 10 bar (145 psi). Jacket Type: Half Pipe/Limpet. Jacket MOC: Stainless Steel 316L. Jacket Temperature: 200 °C (392 °F). Vessel Liquid Capacity: 22,400 L (5,900 gallons).

Type: Filter

Subtype: Rosenmund and Cogiem

Manufacturer: Rosenmund AG

Model: FML 250

Condition: Used

Material: Hastelloy - C22

Filtration Area: 0.25 m² (2.7 ft²)

Diameter: 550 mm (21.7 in)

• Agitated jacketed Rosenmund filter dryer
• Batch size 20 to 25kg
• internal design pressure 0.39 MPa (3.9 bar) + vacuum @ -20/170 degrees C (120 liter)
• coil jackets 0.6 MPa (6 bar) @ -20/170 degrees C (10 liter)
• internal working pressure 0.15 MPa (1.5 bar) @ 100 degrees C
• jacket 0.6 MPa (6 bar) @ 100 degrees C
• 550mm diameter x 828mm from agitator opening to filter plate,
• chamber insulated and with 316L stainless steel cladding, side discharge with 316L stainless steel glove box
• Ex motor,
• filter plate has a raise/lower and a hydraulic lock mechanism driven by the same power pack,
• CE certified,
• unit also includes
• (1) stainless steel condenser, (1) stainless steel tank, (1) heating controller
• Can be used with 248331 APOVAC system for vacuum at an additional cost.

Pressure: 3.9 bar (56.6 psi). Temperature: 170 °C (338 °F). Agitation Seal Type: Mechanical. Jacket: Yes. Jacket Pressure: 6 bar (87 psi). Jacket Type: Half Pipe/Limpet. Jacket MOC: Stainless Steel 316. Jacket Temperature: 170 °C (338 °F).

Type: Filter

Subtype: Rosenmund and Cogiem

Manufacturer: Rosenmund AG

Condition: Used

Material: Hastelloy - C22

Filtration Area: 6 m² (64.6 ft²)

Diameter: 2,800 mm (110.2 in)

(Wetted parts) filter/dryer system dryer base jacket -1/16 bar @ -25/160 degrees C nominal volume of cake 2400 liter shaft is cored for steam heating gas type double mechanical seal shaft with Hydraulic raise/lower mechanism driven by a hydraulic power pack with a 2.2 kW, 3/50/400 volt 1450 rpm IP55 EExde IIB T4 motor side discharge with hydraulic valve fixed bed design with internal sintered mesh filter bed sampling point/outlet design code: AD 2000 Regelwerk PED 97.23/CE (1) 2 square meter top mounted Hastelloy C22 jacketed reverse jet dust filter, design design pressure internal -1/3.2 bar @ -25/160 degrees C 9230 liter), jacket -1/16 bar @ -25/160 degrees C (24 liter), 316L stainless steel jacket, (1) 1000 Nm3/hr COMBIVAC/APOVAC WKP1000/S/PMZE 2510 D6X6/APO 3.2/80/GK1.8 vacuum pump skid with booster pump, manufactured by NCB Gas Processing, asset #10006707 (1) 220 Nm3/hr liquid ring vacuum pump type WKP-4000-AD, 19kw motor, design pressure 100 mbar, (1) 3.2 square meter liquid ring cooler, (1) 1.8 square meter exhaust gas cooler, (1) 80 liter liquid ring tank, all mounted on a carbon steel skid, (1) 1000 Nm3/hr (working) booster pump, type WKP 4000 AD, serial #21170167, manufactured by Pfeiffer Vacuum, 6075m3/hr (max), 4500 rpm (max), pressure 100mbar, driven by 18.5/21kW, 3/50-60/690-400/660-380/415-440 VOLT, 2934/2924/3524 RPM ATEX EEx de IIB T4 IP55 motor,

Pressure: 3.2 bar (46.4 psi). Temperature: 160 °C (320 °F). Jacket: Yes. Jacket Pressure: 16 bar (232.1 psi). Jacket Type: Half Pipe/Limpet. Jacket MOC: Stainless Steel 316. Jacket Temperature: 160 °C (320 °F).