Quote Cart
driven by 60 HP, 3/50/415 rpm TEFC motor. On trolley.
Type: Dryer-Spray
Manufacturer: Niro
Model: F60-BBC06
Condition: Used
Material: Stainless Steel 316
Atomizer Type: Rotary Disc-Wheel
spray head only 60 HP, 3/50/415 volt TEFC motor On trolley No rotor head Openings: 2-2" (50mm), 1-2 1/2" (62mm) with a carbon steel stand
Type: Dryer-Spray
Manufacturer: Niro
Model: FSD-0050-N
Condition: Used
Material: Stainless Steel 316
Diameter: 3,000 mm (118.1 in)
Atomizer Type: Single Fluid Pressure Nozzle
76 kg/hr of powder Nominal evaporative capacity between 250-350 kgs/hr. exhaust 60-70 degrees C, (1) Niro FSD 0050-N 316 stainless steel spray dryer with internal fluid bed, type NVS-50 spray nozzle feed, chamber 3m diameter x 1.3m straight side x 2776mm high cone section, pneumatic hammers on side wall, 2- hinged inspection doors, gas disperser type DPS, (2) 316 stainless steel cyclones, 1 x 1.3m diameter x 3.1m high, 1 x 1.4m diameter x 5m high with hammers (1) direct gas fired supply air heater type NP 35.5, serial # 476, natural gas, nominal load 400 kw, pressure setting 34 bar (min), heater with Maxon airflo line burner type NP-III, size 35.5, (2) Maxon shut off valves, type 5000, size 1.1/4 (1) 0.540 m3/hr Feluwa piston feed pump, type ZGL-30/130-K63-2SM235HD, serial # 21/30824, 7.5 kw, 970 rpm, 1600 m head (max), belt driven 7.5 kw , 3/50/400 volt, 1000 rpm motor, (1) 7633 m3/hr exhaust fan, manufactured by B.Bille, type MT-800-250, order # 8635-N-4, air temperature 50 degrees C, belt driven by 37 kw, 3/50/415 volt, 2950 rpm motor, (1) kinpactor, (1) 1487 m3/hr filter bed fan, manufactured by B.Bille, type HT-25-530, serial # 8635-N-3, air temperature 30 degrees C, driven by 7.5 kw, 3/50/415 volt, 2890 rpm motor, (1) 4609 m3/hr supply air fan, manufactured by B.Bille, type MT-500-310, serial # 8635-N-2, air temperature 30 deg C, driven by 5.5 kw, 3/50/415 volt, 2900 rpm motor, (1) Aerzen roots compressor type blower, type GNA-10.0, 2800 rpm, driven by 3 kw, 3/50/415 volt, 2860 rpm motor, mounted in soudproof cabinet, (13 stainless steel rotary valves, 1 x Niro type DK200, driven by 0.55 kw, 220-240/320-415 volt, 1400 rpm motor, 2 x Niro type SST-208-BS-EX, 208mm diameter tapered rotor, explosion proof, driven by 0.37 kw, 220-240/320-415 volt, 900 rpm motor, (1) stainless steel centrifugal CIP pump, driven by 7.5 kw, 3/50/415 volt 2890 rpm motor (1) heater bank, type 400/240/3-VTI-191T46X23-D7, 3 bar @ 134 deg C, 3.5 liter volume (1) fibreglass scrubber tower, and other ducting, pipework & ancillaries,
Evaporation Rate: 350 kg/h (771.6 lb/h). Inlet Temperature: 250 °C (482 °F). Outlet Temperature: 60 °C (140 °F). CIP: Yes. Heating Type: Gas. Explosion-Shock Resistant: Yes. Height: 7,000 mm (275.6 in).
Type: Dryer-Spray
Manufacturer: Niro
Model: F10-1-D-P-S-N
Condition: Used
Material: Stainless Steel 316
Diameter: 2,134 mm (84 in)
Atomizer Type: Rotary Disc-Wheel
316SS (polished) Chamber dimension 7' dia x 45" str side w/7' cone btm Requires a Niro wheel atomizer belt drive by 3 HP, 3/60/230/460 volt, 3450 rpm TEFC motor 20" side access door W/steam coil mfd by Schenaball, 37.5 sq meter, 7 bar, SN 19605 W/blower and cyclone
Type: Dryer-Spray
Manufacturer: Niro
Model: SD-25 N-R
Condition: Used
Material: Stainless Steel 304
Diameter: 3,400 mm (133.9 in)
Atomizer Type: Rotary Disc-Wheel
multifunctional Spray dryer system with rotary atomization and baghouse filter. on Zinc Oxide, but can dry other inorganic compounds. This spray dryer is an all welded unit comprised of a chamber and cone with the following dimensions: 3.4m diameter x 4.8m straight side x 2.3m coned bottom, 700mm x 400mm access door. The chamber is equipped with pneumatic hammers for helping powder discharge. This spray dryer configuration has a 2 point discharge system. The rotary atomizer is a Niro type F15-GVWO-NPSS rotary atomizer, serial # 767, Drying gas is supplied by a Niro direct gas fired air heater with Maxon airflow burner type NP-35.5, fabrication # 471, liquid petroleum gas fired, 297 kw nominal load, gas supply pressure 8mbar (min), 21 mbar (max). Product/ drying gases are separated by a bag filter, a 31 square meter (339 square feet) Includes the following optional accessories: (1) Brass Hydra-cell spray pump, type G16XDTHFECA, serial # 142602, driven by 2.2/2.55 kw, 3/50/220-240/380-420/440-480 volt, 1420/1720 rpm motor. (1) 1700 liter 304 s/steel feed tank with feed pump, open top, weld coned bottom, 1.4m diameter x 1000mm straight side, Mono Merlin rotary feed pump, type SAB2241VN8, tank and pump mounted on (4) c/steel frame with legs. (1) 250 liter 304 s/steel feed tank with clamp on Lightnin agitator, open top, weld coned bottom, 1.2m diameter x 700mm straight side, Lightnin agitator model LP-75-VH, serial # Q54279, driven by 0.75 kw, 3/50/220/380/420 volt, 1400 rpm motor, tank mounted on (4) c/steel legs. (1) Gericke s/steel centrifugal sifter, type CSM-722-MK2, serial # CM2-7072, 600mm long x 330mm wide,(1) s/steel 3110 m3/hr. @ 160 degrees C fan, manufactured by B.Bille, type HT35-530, fan speed 2900 rpm, 11 kw, 2930 rpm motor. (1) Spiroflow screw conveyor, 60mm diameter x approximately 3m long plastic tube with s/steel screw, driven by 1.75 kw, 3/50/254/277/440 volt, 1115 rpm motor, (1) s/steel 1 ton tote bin, 1m x 1m x 1m deep,
Evaporation Rate: 210 kg/h (463 lb/h). Inlet Temperature: 435 °C (815 °F). Outlet Temperature: 130 °C (266 °F). Heating Type: Gas.