Type: Dryer-Fluid Bed
Manufacturer: Glatt
Model: WSG15
Condition: Used
Material: Stainless Steel 316
Capacity: 45 L (11.9 gallons)
Air Flow Rate: 750 m3/h (441.4 CFM)
15-30 Kg, 45 liter bowl capacity, 52000 K/hr steam heaters, compressed air @ 6 bar, Air warming range -10 degrees C to +70 degrees C, Electrics motor
Pressure: 3 bar (43.5 psi). Temperature: 70 °C (158 °F). Product Density: 0.04 m3 (1.41 ft3).
Type: Dryer-Fluid Bed
Manufacturer: Glatt
Model: GPCG 300/500
Condition: Used
Material: Stainless Steel 316
Capacity: 1,000 L (269.5 gallons)
Air Flow Rate: 2,000 m3/h (1,200 CFM)
Pressure: 12 bar (174 psi). Temperature: 140 °C (284 °F). Bowl Diameter: 3,000 mm (118.1 in). Bowl Height: 1,100 mm (43.3 in). Particle Coating Ability: yes. Orientation: Vertical. Operational Mode: Batch. HEPA Filtration: Yes. Dust Collection: Yes. Explosion-Shock Resistant: Yes.
Type: Dryer-Fluid Bed
Manufacturer: Glatt
Model: GPCG 5/9
Condition: Used
Material: Stainless Steel 316
Capacity: 25 L (6.6 gallons)
Air Flow Rate: 2,000 m3/h (1,200 CFM)
Pressure: 12 bar (174 psi). Temperature: 140 °C (284 °F). Bowl Diameter: 400 mm (15.7 in). Bowl Height: 270 mm (10.6 in). Particle Coating Ability: Yes. Orientation: Vertical. Operational Mode: Batch. HEPA Filtration: Yes. Dust Collection: Yes. Explosion-Shock Resistant: Yes.
Type: Dryer-Fluid Bed
Manufacturer: Glatt
Model: TFO 300-400
Condition: Used
Material: Stainless Steel 304
Capacity: 700 L (184.9 gallons)
Air Flow Rate: 14,000 m3/h (8,250 CFM)
load weight 300 kg special Vitamin-A-Pulver, with cyclones heater and cooler and de-dusting system Filter housing is 1.6m diamter, 2.5mm thick, with (59) bags, at the bottom of the filter housing is a tapered section that has a buterfly valve controling flow into the hopper bottom. Hopper bottom is 304 stainless steel (1.4301), 1190 mm diameter x 640 mm straight side with a 660 mm deep cone. Bottom hopper mounted on 4 legs with wheels. With seperate heating cooling box, rated - heater rated 320,000 Kcal/hr @ 5 atu, air cooler rated 400,000 kcal/hr @ 0/4 degrees c. Main fan is rated 14,000 CuM/Hr, 2900 upm, driven by a 35.8 KW, 3 phase 50 cycle, ExeG3 rated motor
Pressure: 5 bar (72.5 psi). Bowl Diameter: 1,200 mm (46.9 in). Bowl Height: 1,300 mm (51.2 in). Orientation: Vertical.