Quote
Quote Cart
clear all items

Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169

  • Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169 Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169
  • Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169 Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169
  • Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169 Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169
  • Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169
  • Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169
  • Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169
Overview
Evaporator
Wiped/Thin Film
Hitachi
Adjust-O-Film
Used
Stainless Steel 304
Yes
Capacity
3,629 kg/h (8,000 lb/h)
5 m² (54 ft²)
Dimensions
Horizontal
1,219 mm (48 in)
1,829 mm (72 in)
4,013 mm (158 in)
Other Specifications
1.03 bar (15 psi)
182.2 °C (360 °F)
Yes
Skid Mounted
Skid
Yes
Teflon Wipes
190
180 Grit Polish
Jacket
8.6 bar (125 psi)
182.2 °C (360 °F)
Standard
Carbon Steel
Top Head
Flat
Bolted
Bottom Head
Flat
Bolted
Drive
Electric
Belt
18.6 kW (25 HP)
1,765
230/460
3
60
284T
Gearbox
Quantis
BT191502085
7.59:1
32.2 kW (43.2 HP)
1,750
  • Built to ASME code

Similar Equipment

317.5 kg/h (700 lb/h) Stainless Steel 316 Wiped/Thin Film Evaporator

Stainless Steel 316 Wiped/Thin Film Evaporator

Type: Evaporator

Subtype: Wiped/Thin Film

Manufacturer: Hitachi

Condition: Used

Material: Stainless Steel 316

Evaporation Rate: 317.5 kg/h (700 lb/h)

Total Heat Transfer Surface Area: 13 m² (140 ft²)

jkt rated 125 psi @ 350 deg F 2-zone CS jkt. 10' long evaporation section. 8-blade rotor, mech seal on shaft. Belt driven by 30 HP, 3/60/460 volt, 890 rpm TEFC motor.

Orientation: Horizontal. Diameter: 1,067 mm (42 in). Height: 3,048 mm (120 in). Pressure: 1.03 bar (15 psi). Temperature: 176.7 °C (350 °F). Vacuum: Yes. Mechanical Seal on Shaft: Yes.

Stainless Steel 304 Wiped/Thin Film Evaporator

Stainless Steel 304 Wiped/Thin Film Evaporator

Type: Evaporator

Subtype: Wiped/Thin Film

Manufacturer: Balfour

Model: Stratavap

Condition: Used

Material: Stainless Steel 304

Total Heat Transfer Surface Area: 0.23 m² (2.5 ft²)

Orientation: Vertical

wiped film lab size evaporator system. jacket 13.8 bar @ 200 degrees C. Consisting of (1) 2.5 square feet 304 stainless steel vertical jacketed wiped/thin film evaporator. with 304 stainless steel jacket. 4-blade flexible teflon wipers. Rotor driven by Eurodrive, Type RGUV-031A, 30-177 rpm, 17.06:1 ratio, varispeed drive, driven by 3 KW, 3/50/415 volt, 1430 rpm flameproof motor. Mechanical seal. (1) stainless steel circulation pump. manufactured by Howard Pumps, serial #14037, model #CL2-20. Capacity 5000 liter/hour, pressure 6 bar. Eurodrive 98-381 rpm, 5.04:1 ratio, varispeed drive, driven by 7.5 KW, 3/50/415 volt, 1440 rpm flameproof motor. (1) approx 15 square feet stainless steel tube, head and carbon steel shell heat exchanger. manufactured by Johnsons, serial #63055. Pressure 163 psi @ 300 degrees C. Shell 7" diameter x 72" long. Shell with expansion bellows.

Diameter: 152.4 mm (6 in). Height: 762 mm (30 in). Pressure: 1 bar (14.5 psi). Temperature: 200 °C (392 °F). Vacuum: Yes. Mechanical Seal on Shaft: Yes. Drive Type: Eurodrive RGUV-031A.

626 kg/h (1,380 lb/h) Stainless Steel 304 Wiped/Thin Film Evaporator

Stainless Steel 304 Wiped/Thin Film Evaporator

Type: Evaporator

Subtype: Wiped/Thin Film

Manufacturer: Buflovak/Blaw Knox

Model: Roto-Vak Mdl

Condition: Used

Material: Stainless Steel 304

Clad: Yes

Evaporation Rate: 626 kg/h (1,380 lb/h)

Total Heat Transfer Surface Area: 4.6 m² (50 ft²)

304 ELC SS 40% clad on Carbon steel (for product contact), thin film evaporator system 165 psi @ 400 deg F jkt NB stamped 5932. Rotor was under driven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor speed Unit has external upper & lower bearings, mech seals on shaft. Unit has 3" feed port and 10" x 24" discharge into centrifugal vapor/liquid separator. 36" deep cone btm W/system is 565 sq ft, 304LSS shell side, CS head, horiz condenser with 3/4" OD x 18 bwg, 304LSS tubes, 143" long. 6 pass tube side. 18" dia 304ELC SS shell 161" overall length. CS channels. Unit designed for 30 psi & full vac @ 400 deg F shell side; 100 psig @ 400 deg F tube side. Openings: shell 1-10", 1-3"; channels 2-4" one head, (2) 3/4" other head. Mfd by Patterson Kelly. Also w/unit is an 81 sq ft aftercondenser. Mfd by Graham, 304SS shell side, CS tube side. Unit rated 50 psig/full vac @ 150 deg F shell side; 75 psig @ 150 deg F tube side. Asme code constructed. 8" dia shell, 8' long tubes, 9'11" overall length.

Diameter: 1,016 mm (40 in). Height: 1,727 mm (68 in). Pressure: 1.03 bar (15 psi). Temperature: 204.4 °C (400 °F). Vacuum: Yes. Mechanical Seal on Shaft: Yes.

626 kg/h (1,380 lb/h) Stainless Steel 304 Wiped/Thin Film Evaporator

Stainless Steel 304 Wiped/Thin Film Evaporator

Type: Evaporator

Subtype: Wiped/Thin Film

Manufacturer: Buflovak/Blaw Knox

Model: Roto-Vak Mdl

Condition: Used

Material: Stainless Steel 304

Clad: Yes

Evaporation Rate: 626 kg/h (1,380 lb/h)

Total Heat Transfer Surface Area: 4.6 m² (50 ft²)

304 ELC SS 40% clad on Carbon steel (for product contact), thin film evaporator system Mfd by Buflovak 165 psi @ 400 deg F jkt. NB stamped 5931. Rotor was under driven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor speed. (motor for drive not available). Unit has external upper & lower bearings, mech seals on shaft. Unit has 3" feed port and 10" x 24" discharge into centrifugal vapor/liquid separator. 36" deep cone btm. W/system is 565 sq ft, 304LSS shell side, CS head, horiz condenser with 3/4" OD x 18 bwg, 304LSS tubes, 143" long. 6 pass tube side. 18" dia 304ELC SS shell 161" overall length. CS channels. Unit designed for 30 psi & full vac @ 400 deg F shell side; 100 psig @ 400 deg F tube side. Openings: shell 1-10", 1-3"; channels 2-4" one head, (2) 3/4" other head. Mfd by Patterson Kelly. Also w/unit is an 81 sq ft aftercondenser. Mfd by Graham, 304SS shell side, CS tube side. Unit rated 50 psig/full vac @ 150 deg F shell side; 75 psig @ 150 deg F tube side. Asme code constructed. 8" dia shell, 8' long tubes, 9'11" overall length.

Diameter: 1,016 mm (40 in). Height: 1,727 mm (68 in). Pressure: 1.03 bar (15 psi). Temperature: 204.4 °C (400 °F). Vacuum: Yes. Mechanical Seal on Shaft: Yes.