Stainless Steel 316L Rosenmund RPD-12-810-94 Rosenmund and Cogiem Filter/Dryer - IPP# 242535

Type: Filter

Subtype: Rosenmund and Cogiem

Manufacturer: Rosenmund AG

Model: APOVAC

Condition: Used

Material: Stainless Steel 316L

Filtration Area: 0.3 m² (3.2 ft²)

Diameter: 457.2 mm (18 in)

• APOVAC system skid mounted.

• 80 CFM 2.2 GPM with a Sulzer Burkhardt Vacuum Pump, typically contains two heat exchangers and a receiver.

• All on a skid mounted system.

• Can be used with the following IPP stock numbers: 247646, 247146, 247050, 209158, 230453, 705428, 706865, 248105, & 247051

• Receiver is 316 L SS, 20 Gallon, 18" diameter x 18" straight side, rated for FV/60 psi at 248 degrees F.

• Heat exchanger serial # W8788C, 10 Sq. Ft., 316L SS tubes, tube sheets, heads and shell. Shell rated for FV90 psi at 248 Degrees F., tubes rated for FV 60 psi at 248 degrees F.

  31 straight tubes, 0.75" diameter x 18 GA x 22" long.

• Heat exchanger, serial # W8788B, 202 Sq.Ft. 316L SS tubes, tube sheets, heads and shell. Shell rated for FV90 psi at 248 Degrees F., tubes rated for FV 60 psi at 248 degrees F.

  31 Straight tubes, 1" diameter x0.065" x 25" long.

Pressure: 4.1 bar (60 psi). Temperature: 120 °C (248 °F). Vacuum: Yes. Internal Finish: Mill 2B.

Type: Filter

Subtype: Rosenmund and Cogiem

Manufacturer: Rosenmund AG

Model: FML 250

Condition: Used

Material: Hastelloy - C22

Filtration Area: 0.25 m² (2.7 ft²)

Diameter: 550 mm (21.7 in)

• Agitated jacketed Rosenmund filter dryer
• Batch size 20 to 25kg
• internal design pressure 0.39 MPa (3.9 bar) + vacuum @ -20/170 degrees C (120 liter)
• coil jackets 0.6 MPa (6 bar) @ -20/170 degrees C (10 liter)
• internal working pressure 0.15 MPa (1.5 bar) @ 100 degrees C
• jacket 0.6 MPa (6 bar) @ 100 degrees C
• 550mm diameter x 828mm from agitator opening to filter plate,
• chamber insulated and with 316L stainless steel cladding, side discharge with 316L stainless steel glove box
• Ex motor,
• filter plate has a raise/lower and a hydraulic lock mechanism driven by the same power pack,
• CE certified,
• unit also includes
• (1) stainless steel condenser, (1) stainless steel tank, (1) heating controller
• Can be used with 248331 APOVAC system for vacuum at an additional cost.

Pressure: 3.9 bar (56.6 psi). Temperature: 170 °C (338 °F). Agitation Seal Type: Mechanical. Jacket: Yes. Jacket Pressure: 6 bar (87 psi). Jacket Type: Half Pipe/Limpet. Jacket MOC: Stainless Steel 316. Jacket Temperature: 170 °C (338 °F).

Type: Filter

Subtype: Rosenmund and Cogiem

Manufacturer: Rosenmund AG

Condition: Used

Material: Hastelloy - C22

Filtration Area: 6 m² (64.6 ft²)

Diameter: 2,800 mm (110.2 in)

(Wetted parts) filter/dryer system dryer base jacket -1/16 bar @ -25/160 degrees C nominal volume of cake 2400 liter shaft is cored for steam heating gas type double mechanical seal shaft with Hydraulic raise/lower mechanism driven by a hydraulic power pack with a 2.2 kW, 3/50/400 volt 1450 rpm IP55 EExde IIB T4 motor side discharge with hydraulic valve fixed bed design with internal sintered mesh filter bed sampling point/outlet design code: AD 2000 Regelwerk PED 97.23/CE (1) 2 square meter top mounted Hastelloy C22 jacketed reverse jet dust filter, design design pressure internal -1/3.2 bar @ -25/160 degrees C 9230 liter), jacket -1/16 bar @ -25/160 degrees C (24 liter), 316L stainless steel jacket, (1) 1000 Nm3/hr COMBIVAC/APOVAC WKP1000/S/PMZE 2510 D6X6/APO 3.2/80/GK1.8 vacuum pump skid with booster pump, manufactured by NCB Gas Processing, asset #10006707 (1) 220 Nm3/hr liquid ring vacuum pump type WKP-4000-AD, 19kw motor, design pressure 100 mbar, (1) 3.2 square meter liquid ring cooler, (1) 1.8 square meter exhaust gas cooler, (1) 80 liter liquid ring tank, all mounted on a carbon steel skid, (1) 1000 Nm3/hr (working) booster pump, type WKP 4000 AD, serial #21170167, manufactured by Pfeiffer Vacuum, 6075m3/hr (max), 4500 rpm (max), pressure 100mbar, driven by 18.5/21kW, 3/50-60/690-400/660-380/415-440 VOLT, 2934/2924/3524 RPM ATEX EEx de IIB T4 IP55 motor,

Pressure: 3.2 bar (46.4 psi). Temperature: 160 °C (320 °F). Jacket: Yes. Jacket Pressure: 16 bar (232.1 psi). Jacket Type: Half Pipe/Limpet. Jacket MOC: Stainless Steel 316. Jacket Temperature: 160 °C (320 °F).