New and Used Equipment

• design pressure internal 4 bar + full vacuum @ -29/185 degrees C,
• jacket 10 bar + full vacuum @ -29/185 degrees C,
• fixed bed design,
• 5.8-11.8 rpm shaft speed,
• driven by 18/9.9kw 3/50/415 volt 1500-750 rpm EEx de IIB T4 motor via a reduction gearbox,
• reversing agitator for discharging,
• packed gland,
• shaft with Hydraulic raise/lower mechanism, driven by a hydraulic power pack with a 4kw, 3/50/415 volt 1500 rpm EExd IIB T4 motor,
• 304L stainless steel half pipe coil jacket on straight side,
• carbon steel half pipe coil jacket on filter base,
• side discharge with hydraulic valve,
• slurry outlet with a 100/80mm SCHUF valve,
• internal wash ring/spray bar,
• weld dished top, weld flat bottom,
• 3.2m diameter x 1060mm straight side,
• side inspection manway with cover and davit,
• design code: ASME VIII DIV 1 ED.89 + ADD 90,

system includes

• (1) 340 Nm3/hr 316L stainless steel Apovac PMZK 3817 D3x6 vacuum pump skid, manufactured by Sulzer, skid includes: (1) 340 Nm3/hr 316L stainless steel vacuum pump, manufactured by Sulzer, driven by 37kW, 3/50/415 volt, 975 rpm EEx de IIB T4 motor, (1) 6.7 square meter 316L stainless steel tube and shell heat exchanger (liquid ring cooler), manufactured by Kasag, pressure tube side -1/4 barg @ -29/185 degrees C, shell -1/10 barg @ -29/185 degrees C, (1) 10 square meter 316L stainless steel tube and shell heat exchanger (exhaust gas cooler), manufactured by Kasag, pressure tube side -1/4 barg @ -29/185 degrees C, shell -1/10 barg @ -29/185 degrees C, (1) 5 square meter 316L stainless steel tube and shell heat exchanger (N2 Heater), manufactured by Kasag, pressure tube side -1/4 barg @ -29/185 degrees C, shell -1/10 barg @ -29/185 degrees C, (1) 190 liter 316L stainless steel pressure tank (condensate receiver), manufactured by Kasag, pressure -1/4 barg @ 50 degrees C,
• (2) 316L stainless steel centrifugal pumps, manufactured by Girdlestone, type 12CABC2G, 16 bar @ 20 degrees C, driven by 7.5kW, 3/50/415 volt, 2890 rpm EEx de IIB T4 motor,

• design pressure internal 4 bar + full vacuum @ -29/185 degrees C (9100 liter),
• jacket 10 bar + full vacuum @ -29/185 degrees C (165 liter),
• fixed bed design,
• 6.5-13 rpm shaft speed,
• driven by 10/6.6kw 3/50/415 volt, 1500/750 rpm EExd IIB T4 motor via a reduction gearbox,
• reversing agitator for discharging,
• packed gland,
• shaft with Hydraulic raise/lower mechanism, driven by a hydraulic power pack with a 4kw, 3/50/415 volt 1500 rpm EExd IIB T4 motor,
• side discharge with hydraulic valve,
• 304L stainless steel half pipe coil jacket on straight side,
• carbon steel half pipe coil jacket on filter base,
• slurry outlet with a 100/80mm SCHUF valve,
• weld dished top, weld flat bottom,
• 2.8m diameter x 1050mm straight side,
• internal wash ring/spray bar,
• side inspection manway with cover and davit,
• mounted on feet with load cells,
• design code: ASME VIII DIV I ED 89 + ADD 90,

system includes

• (1) 340 Nm3/hr 316L stainless steel Apovac PMZK 3817 D3x6 vacuum pump skid, manufactured by Sulzer, skid includes (1) 340 Nm3/hr 316L stainless steel PMZK 3817 D3x6 vacuum pump, manufactured by Sulzer Burkhardt, serial #52771, (1) 6.7 square meter 316L stainless steel tube and shell heat exchanger (liquid ring cooler), manufactured by Kasag, pressure tube side -1/4 barg @ -29/185 degrees C, shell -1/10 barg @ -29/185 degrees C, (1) 10 square meter 316L stainless steel tube and shell heat exchanger (exhaust gas cooler), manufactured by Kasag, pressure tube side -1/4 barg @ -29/185 degrees C, shell -1/10 barg @ -29/185 degrees C, (1) 5 square meter 316L stainless steel heat exchanger (N2 Heater), manufactured by Kasag, pressure tube side -1/4 barg @ -29/185 degrees C, shell -1/10 barg @ -29/185 degrees C, (1) 190 liter 316L stainless steel pressure tank (condensate receiver), manufactured by Kasag, pressure -1/4 barg @ 50 degrees C,
• (1) 60m3/hr @ 13.6m head 316 stainless steel centrifugal pump (P1), manufactured by Girdlestone, type 12CSD2G, serial #53451, size 80-50-175, driven by 7.5kW, 3/50/415 volt, 2890 rpm EEx de IIB T4 motor, sealless type, mounted on a baseplate,
• (1) 10m3/hr @ 26m head PFA lined centrifugal pump (P2), manufactured by Richter, type PCK/F 32-160, serial #917493/3/3, 2900 rpm, 147mm diameter impellor, driven by 5.5kW, 3/50/415 volt, 2900 rpm EEx de IIB T4 motor, mechanical seal, mounted on a baseplate

• design pressure internal 4 bar + full vacuum @ -28.8/185 degrees C (12800 liter),
• jacket 10 bar + full vacuum @ -28.8/185 degrees C (140 liter),
• internals mirror polished to 0.4um Ra,
• fixed bed design,
• 3.2m diameter x 1.2m straight side,
• bottom discharges,
• shaft with internal bellows,
• shaft driven by 30kw 3/50/400 volt IP55 EExd IIB T4 motor via a 210:1 ratio reduction gearbox,
• shaft speed 1.43-10.7 rpm,
• mechanical seal with lubricator,
• shaft with Hydraulic raise/lower mechanism, driven by a hydraulic power pack with a 7.5kw 3/50/400 volt IP55 EExd IIB T4 motor,
• jacket on straight side and bottom filter bed,
• internal wash ring/spray bar,
• side inspection manway with cover and davit,
• design code: 97/23/CE (supported by ASME VIII DIV 1 Ed 2000),
• Note: Side Discharge Valve Not Included

(1) centrifugal pump, driven by 11/12.5kW 3/50-60/690-400/660-380/415-440 volt, 2936/2929/2942/3526 rpm EEx de IIB T4 B3 ATEX motor,

• pressure jacketed Nutsche filter body only,
• highly polished internals
• design pressure internal 4 bar + full vacuum @ -28.8/185 degrees C (12800 liter),
• jacket 10 bar + full vacuum @ -28.8/185 degrees C (150),
• jacket on straight side and bottom filter bed,
• fixed bed design,
• hydraulic raise and lower mechanism on drive,
• drive gearbox type R-FV/400, serial #M101, 207:1 ratio, 24kW input power, 1500 rpm input speed,
• internal wash ring/spray bar,
• side inspection manway with cover and davit,
• design code: 97/23-CE, ASME VIII DIV 1, ED.98 ADD.2000

• agitated pressure Nutsche filter,
• design pressure internal -1/3.2 bar @ -10/200 degrees C (22400 liter),
• jacket -1/10 bar @ -10/200 degrees C (170 liter),
• filter base jacket 6 bar @ -10/200 degrees C (407 liter)
• 6000 liter nominal cake volume
• 500mm cake height
• fixed bed design with 316L stainless steel filter mech
• center bottom discharge via plunger that runs down the center of the shaft,
• shaft driven by 37/42kw 3/50-60/690-400/660-380/415-440 volt 1480/1478/1482/1778 rpm EEx de IIB T4 ATEX motor via a 253.356:1 ratio reduction gearbox,
• Packed gland
• shaft speed 2.7-8.2 rpm,
• shaft with Hydraulic raise/lower mechanism, driven by a hydraulic power pack with 2.2kw, 3/50/380 volt, 1500 rpm EEx de IICT4 motor,
• internal wash ring/spray bar,
• side inspection manway with cover and davit,

(1) 60m3/hr @ 27.5m head centrifugal pump, driven by 11/12.5kW 3/50-60/690-400/660-380/415-440 volt, 2936/2929/2942/3526 rpm, EEx de IIB T4 ATEX motor, mounted on a baseplate

• design pressure internal 4 bar + full vacuum @ -29/185 degrees C (12500 liter),
• jacket 10 bar + full vacuum @ -29/185 degrees C (225 liter),
• 5.8-11.8 rpm shaft speed,
• shaft driven by 18/9.9 kw, 3/50/415 volt, 1500/750 rpm, EExd IIB T4 motor via a 125:1 ratio reduction gearbox,
• reversing agitator for discharging,
• packed gland,
• shaft with Hydraulic raise/lower mechanism driven by an hydraulic power pack, powerpack driven by 4kw, 3/50/415 volt, 1500 rpm EExd IIB T4 motor,
• 304L stainless steel half pipe coil jacket on straight side,
• carbon steel half pipe coil jacket on bottom filter bed,
• fixed bed design,
• side bottom discharge with a 100/80mm SCHUF valve,
• internal wash ring/spray bar,
• side inspection manway with cover and davit,
• designed code ASME VIII DIV 1 ED 89 & 90,
• Note: Does not include side discharge valve

(1) 60m3/hr @ 13.6m head 316 stainless steel centrifugal pump, manufactured by Girdlestone, type 12CSD2G, serial #53452, size 80-50-175, driven by 7.5kW, 3/50/415 volt 2890 rpm EEx de IIB T4 motor, mounted on a baseplate,

• design pressure internal 4 bar + full vacuum @ -29/185 degrees C (9100 liter),
• jacket 10 bar + full vacuum @ -29/185 degrees C (165 liter),
• fixed bed design,
• bottom discharge
• 6.5-13 rpm shaft speed,
• driven by 10/6.6kw 3/50/415 volt, 1440/725 rpm EExd IIB T4 motor via a reduction gearbox,
• reversing agitator for discharging,
• packed gland,
• shaft with Hydraulic raise/lower mechanism, driven by a hydraulic power pack with a 4kw, 3/50/415 volt 1500 rpm EExd IIB T4 motor,
• 304L stainless steel jacket on straight side,
• carbon steel half pipe coil jacket on filter base,
• slurry outlet with a 100/80mm SCHUF valve,
• internal wash ring/spray bar,
• side inspection manway with cover and davit,
• design code: ASME VIII DIV I ED 89 + ADD 90,

(1) 60m3/hr @13.7m head 316 stainless steel centrifugal pump, manufactured by Girdlestone, type 12GSD2G, serial #58645, size 80-50-175, driven by 7.5kW, 3/50/415 volt, 2890 rpm EEx de IIB T4 motor, mounted on a baseplate,

(1) 10m3/hr @ 26m head 316 stainless steel centrifugal pumps, manufactured by Richter, type PCK/F 32-160, serial #917493/3/1, 2900 rpm, 147mm diameter impellor, driven by 5.5kW, 3/50/415 volt, 2900 rpm EEx de IIB T4 motor, mounted on a baseplate,

• Agitated vacuum nutsche filter, internal pressure -1/4 bar @ -10/100 degrees C, 9000 liters.
• Internal washing/spray bar, clamped flat filter base mounted on castors for removal.
• side discharge with valve driven by a hydraulic power pack.
• Power Pack driven by 22kW/3~/50Hz/500V/1.480rpmEEx motor via a Flender reduction gearbox.

pressure filter Internal (330 ltr) Jacket (35 ltr) Raise/lower mechanism, max lifting 200 mm

Skid mounted with hydraulic assisted head removal.

Stainless type is austenitic but close to 304. 120 Liter tank.

• Pressure Nutsche Filter
• Racker lift driven by 0.37 kW 3/50/380 V motor.
• Cake thickness 600 mm.
• Equipped with CIP spray ring on top of filter body.
• Bottom Discharge.
• Clamp top, welded bottom.

5570 liter jacketed tumbling pressure Nutsche filter internal pressure -1/2 bar @ 50/134 degrees C, jacket -1/2 bar @ 50/134 degrees C (339 liter) with hydraulic open/close assist hydraulic driven raker agitator driven by a hydraulic powerpack the whole filter rotates for discharge via a hydraulic motor driven by the same powerpack

• pressure nutsche filter
• Cake thickness 400 mm
• Side Discharge
• Filter plate is mounted on casters.
• SEW Usocome gear reducer type FHF 100P.Packing gland on shaft.
• Hydraulic lift of agitator driven by 0.75 kW 3/50/220/440 V, 1350 RPM motor

Internal 185 litre Jacket 48 litre stainless steel jacket on straight side and bottom dish filter plate with manual raise/lower mechanism TUV certified

internal (185liter), jacket (48liter) 316L stainless steel jacket on straight side and bottom dish filter plate with manual raise/lower mechanism, TUV certified

• 316 stainless steel agitated jacketed pressure Nutsche filter
• Filter volume 7200 liters.
• Drive manufactured by Von Roll, Type CRG5Hydraulic racker lift driven by 0.75 HP, 3/50/500 volt, 1450 rpm motor.
• Packing gland on shaft.
• Side discharge.

600 L carbon steel jacket on straight side only TUV certified

• design pressure internal -1/4 bar @ -28/185 degrees C,
• jacket -1/10 bar @ -28/185 degrees C,
• jacket on straight side and on bottom filter bed,
• fixed bed design,
• shaft driven by 27/16kw 3/50/400 volt ATEX II 2G/D EEx de II T4 motor,
• shaft speed 3.5 to 7.1 rpm,
• flowserve gas type mechanical seal,
• internal bellows on shaft,
• Hydraulic raise/lower mechanism, driven by a hydraulic power pack with a 7.5kW 3/50/400 volt ATEX II2G/D EEx de IIB T4 motor,
• side discharge with hydraulic valve,
• internal spray bar,
• side inspection manway with cover and davit,
• design code: ASME VIII DIV 1, Ed.2004 + add.05 C.C.2523 + PED 97/23/CE,

(1) 15 m3/hr @ 21.38m head 316 stainless steel centrifugal pump, manufactured by HMD Sealless Pumps, type GSI 65-50-160 D-A4, serial #827182, asset #10006291, 140mm diameter impellor, 2900 rpm, NPSH 2.76m, magnetic drive, driven by 3kw 3/50/400 volt 2900 rpm IP55 Eex de IIB T4 motor, 75mm suction, 50mm discharge

• design pressure internal 4 bar + full vacuum @ -29/185 degrees C (5400 liter),
• jacket 10 bar + full vacuum @ -29/185 degrees C (120 liter),
• 304L stainless steel half pipe coil jacket on straight side and filter base,
• 7.3-14.6 rpm shaft speed,
• driven by 10/6.6kw 3/50/415 volt 1440/750 rpm EExd IIB T4 motor via a reduction gearbox,
• reversing agitator for discharging,
• packed gland, s
• haft with Hydraulic raise/lower mechanism, clamped bottom filter bed with raise/lower mechanism, both driven by a hydraulic power pack with a 7.5kw, 3/50/415 volt 1447/1454 rpm EExd IIB T4 motor via a reduction gearbox,
• side discharge with hydraulic valve,
• slurry outlet with a 80/80mm SCHUF valve,
• filter bed on wheels for cleaning,
• internal wash ring/spray bar,
• side inspection manway with cover and davit,
• design code: ASME VIII DIV ED 89 + ADD 90,

(1) 316L stainless steel centrifugal pump, manufactured by Girdlestone, type 12CSD2G, serial #59209, size 3" x 2" x 175, max working pressure 16 bar @ 20 degrees C, driven by 7.5kW, 3/50/415 volt, 2890 rpm EEx de IIB TA motor, mounted on a baseplate,

(1) 316L stainless steel centrifugal pump, manufactured by Girdlestone, type 10AO3H, serial #53531, size 20 X 40 x 175, driven by 7.5kW, 3/50/415 volt, 2890 rpm EEx de IIB TA motor, mounted on a baseplate,

• design pressure internal 4 bar + full vacuum @ -28.8/185 degrees C (10000 liter),
• jacket 10 bar + full vacuum @ -28.8/185 degrees C (125 liter),
• CE02 0062,
• internals polished to 0.4um Ra,
• half pipe coil jacket on straight side and bottom,
• filter bed with filter clothe,
• fixed bed design,
• driven by 20/11kw 3/50/400 volt 1470/730 rpm IP55 EEx de IIB T4 motor via 185: 1 ratio gearbox,
• shaft speed 4-8 rpm,
• reversing agitator,
• Flowserve mechanical seal with lubricator pot
• shaft with bellows,
• shaft with Hydraulic raise/lower mechanism, driven by a hydraulic power pack with a 7.5kw, 3/50/400 volt IP55 EEx d IIB T4 motor, bottom discharge,
• internal wash ring/spray bar,
• side inspection manway with cover and davit,
• mounted on feet with load cells,
• design code: 97/23/CE ASME VIII DIV 1 ED 98 ADD 2000,

(1) 66m3/hr @ 19.74m head 316L stainless steel centrifugal pump, manufactured by HMD Sealless Pumps, type GSI 100x80x160H EA6, serial #PU822864, 180mm diameter impellor, driven by 11/12.5kw, 3/50-60/690-400/660-380/415-440 volt 2936/2929/2942/3526 rpm Eex d IIB T4 ATEX motor, mounted on a baseplate,

• design pressure internal 4 bar + full vacuum @ -29/185 degrees C (12800 liter),
• jacket 10 bar + full vacuum @ -29/185 degrees C (150 liter),
• classification: ATEX Ex II 2GD II B c Tx, II 2G IIB c Tx, CE 13700575,
• fixed bed design,
• shaft with bellows,
• shaft speed 3.5-7.1 rpm,
• driven by 27/16kw, 3/50/400 volt ATEX II 2G/D EEx de IIB T4 motor,
• Flowserve gas type mechanical seal,
• shaft with Hydraulic raise/lower mechanism, driven by a hydraulic power pack,
• side discharge with hydraulic valve,
• internal spray bar with nozzles,
• side inspection manway with cover and davit,
• slurry discharge with SCHUF pneumatic double acting actuated valve,
• design code: ASME VIII DIV 1 97/23/CE,

(1) 15 m3/hr @ 8.4m head 316 stainless steel centrifugal pump, manufactured by CP Pumpen Ag, serial #07-00784/55975, type MKP 65-40-160, pressure 16 bar @ -40/205 degrees C, differential pressure 0.6 bar, NPSH 1.1m, driven by 1.5kW, 3/50/400 volt 1450 rpm IP55 EEx de II BT4 ATEX motor, magnetic drive, openings suction 62mm, discharge 32mm, mounted on a baseplate

• 316 stainless agitated jacketed pressure Nutsche filter.
• Filter volume 7200 liters
• Hydraulic racker lift driven by 0.75 KW, 3/50/500 volt motor.
• Packing gland on shaft.
• Side discharge.

• design pressure internal 4 bar + full vacuum @ -29/185 degrees C (5400 liter),
• jacket 10 bar + full vacuum @ -29/185 degrees C (120 liter),
• 304L stainless steel coil jacket on straight side and bottom filter base,
• 7.3-14.6 rpm shaft speed,
• driven by 10/6.6kw 3/50/415 volt, 1500/750 rpm EExd IIB T4 motor via a reduction gearbox,
• reversing agitator for discharging,
• packed gland,
• shaft with Hydraulic raise/lower mechanism, bottom filter bed with raise/lower mechanism, both driven by a hydraulic power pack, powerpack driven by 4kw, 3/50/415 volt 1430 rpm EExd IIB T4 motor,
• side discharge with hydraulic valve,
• slurry outlet with a 80/80mm SCHUF valve,
• filter bed on wheels for cleaning,
• side inspection manway with cover and davit,
• design code: ASME VIII DIV 1 ED. 89 + A.90,

(1) 60m3/hr @ 13.6m head 316L stainless steel centrifugal pump, manufactured by Girdlestone, type 12CSD2G, serial #53453, driven by 7.5kW, 3/50/415 volt, 2890 rpm EEx de IIB T4 motor, mechanical seal, mounted on a baseplate,

(1) 10m3/hr centrifugal pump, manufactured by Chemquip Fluid Engineers, type PCK/F32-160, serial #546336/8/2, 2900 rpm, 147mm diameter impellor, driven by 5.5kW, 3/50/415 volt, 2900 rpm EEx de IIB T4 motor, mechanical seal, mounted on a baseplate

Side discharge 500mm dia Raker driven by 6 PS, 3/50/500 volt 1480 rpm motor W/Von Roll Type PLR65 gear reducer. Hydraulic lift driven by 0.3 KW 3/50/500 volt motor. W/(2) polypropylene hinged covers1-100mm center btm outlet.