stainless steel (highly polished) Glatt Fluid Bed Dryer, chamber approx 490mm diameter, (2) interchangeable bottom sections each with its own bowl, (1) stainless steel bowl 400mm top diameter x 270mm straight side x 270mm bottom diameter with trolley, (1) stainless steel bowl 350mm top diameter x 630mm straight side x 160mm bottom diameter with trolly, both bowls with internal filter meshes, internal hoist for filter bags, mounted on stainless steel legs, control panel with Eurotherm Chessel 6100X10 graphic chart recorder, Bowl Diameter: 400 mm (15.7 in). Orientation: Vertical.
600 liter 316/304 stainless steel Glatt fluid bed granulator dryer, Project #8931/100.614/100.614, 1.4m diameter drying chamber, lower section has inflatable gasket, charging port with quick acting gate valve, filter housing with an installed product retaining filter, pressure relief openings with installed plates in the filter housing and following pressure relief ducts, (2) 316/304 stainless steel bowls, bowl dimensions 1.4m top diameter x 550mm straight side x 1m bottom diameter, bowls with bottom sieve mesh and trolley, bowl mesh max differential pressure 5000 Pa, (1) stainless steel bowl tipper, inlet air handling unit, (1) fan, Stahl Exicom control, B40 MAN high speed mixer Capacity: 600 L (158.5 gallons). Bowl Diameter: 1,400 mm (55.1 in). Bowl Height: 550 mm (21.7 in). Orientation: Vertical. Dust Collection: Yes. Explosion-Shock Resistant: Yes.
stainless steel highly polished Glatt fluid bed dryer, manufactured by Glatt AG (Switzerland), nominal capacity 1000kg, max capacity 1600kg, approx 3m diameter drying chamber, stainless steel bowl, dimensions 3m top diameter x 1.1m high x 1.1m bottom diameter, bowl fixed to a lifting mechanism, internal filters with hoist, (2) inspection doors for filter, suppression system, Bowl Diameter: 3,000 mm (118.1 in). Bowl Height: 1,100 mm (43.3 in). Orientation: Vertical. Dust Collection: Yes. Explosion-Shock Resistant: Yes.
15-30 Kg, 45 liter bowl capacity, 52000 K/hr steam heaters, compressed air @ 6 bar, Air warming range -10 degrees C to +70 degrees C, Electrics motor Capacity: 45 L (11.9 gallons). Air Flow Rate: 750 m3/h (441.4 CFM). Pressure: 3 bar (43.5 psi). Temperature: 70 °C (158 °F). Product Density: 0.04 m3 (1.41 ft3).
5 Kg fluid bed dryer/granulator, Steam heated W/fan driven by 2.5 KW, 3/50/220/380 volt, 3000 rpm motor, Heating capacity 16500 Kcal/hr, Cylindrical drying chamber, (2) product bins 400/220mm dia x 270mm deep, Upper drying section 400mm dia x 600mm long w/(1) 100mm x 200mm and (1) 220mm x 220mm sight glasses, W/steam valve, Mtd on steel frame w/(4) legs 700mm x 600mmControl panel includes: temp control, air temp control, timers, air for spray indication, valve control Capacity: 22 L (5.8 gallons). Air Flow Rate: 350 m3/h (206 CFM). Pressure: 3 bar (43.5 psi). Bowl Diameter: 400 mm (15.7 in). Bowl Height: 600 mm (23.6 in). Operational Mode: Batch.
Note: Drawings show Mills, we did not get some of them. Suitable for installation in Hazardous areas.
Typical working volume is 30-225 liters based on the allowable product density of 1500 kg/m
This fluid bed dryer was designed for Pharmaceutical service and features sanitary design and clean in place
With wet and dry loading ports, internal lighting, and sample ports
Air handling is custom manufactured by ZAir, Type SKG-4
Manufactured of 316 SS construction
This unit is complete with all filters, and accessories
High shear granulator (IPP Stock # 233969) is available at additional cost. 100 kg Capacity: 280 L (74 gallons). Pressure: 11 bar (159.5 psi). Temperature: 100 °C (212 °F). Clean in Place: Yes. Bowl Diameter: 900 mm (35.4 in). Orientation: Vertical. Product Density: 1,500 m3 (52,972 ft3). Operational Mode: Batch. Dust Collection: Yes. Explosion-Shock Resistant: Yes.
Documentation shows Mills but we did not get some of them. With spare product containers. (read below) 60 kg Explosion shock resistant fluid bed dryer. Designed for cGMP production, it is a contained system, and can be used for other process’ such as food agglomeration and drying Model - MP2/3-K2-F1/2 Rated for Maximum absolute pre pressure of 11 bar and Maximum explosion over pressure of 12 bar Total volume 610 liters typical working volume is 18-160 liters based on the allowable product density of 1500 kg/m This fluid bed dryer was designed for Pharmaceutical service and features sanitary design and clean in place With wet and dry loading ports, internal lighting, and sample ports Designed for liquid/binder addition, it includes the Peristaltic transfer pump. This dryer is part of a contained system, product never reaches outside the unit. It is also integrated to work with products upstream and downstream. Designed for easy and quick cleaning and changeovers, the clean in place and all the operations are completely automated, and can be controlled at a local operator station Air handling is achieved with a custom manufactured unit by ZAir, Type SKG-4,2 507-68273-1 Manufactured of 304 SS construction, it’s rated for 130-670 m3/Hr. at 20-80 degrees C This unit handles all the air heating, cooling, and humification duties The Main fan is driven by a 12.7 kW AC motor, and it also has a HEPA filter This unit is complete with all filters, and accessories High shear granulator available (IPP Stock # 233967. This unit also has spare product containers. Product containers are FBP 07304A.FBP101, # 001, built 2019, with Product container trolly. FBP 07304A.FBP101, # 002, built 2019, with Product container trolly. FBP 07304A.FBP101, # 003, built 2019, with Product container trolly Unit comes with one product container, all other additional equipment is available at an additional cost Capacity: 160 L (42.3 gallons). Air Flow Rate: 670 m3/h (394.3 CFM). Pressure: 12 bar (174 psi). Temperature: 100 °C (212 °F). Clean in Place: Yes. Bowl Diameter: 650 mm (25.6 in). Bowl Height: 1,000 mm (39.4 in). Orientation: Vertical. Product Density: 1,500 m3 (52,972 ft3). Operational Mode: Batch. HEPA Filtration: Yes. Dust Collection: Yes. Explosion-Shock Resistant: Yes.
120 kg Aeromatic Fluid bed dryer/ coater Com.No. 88 91 42 Bowl volume is 240 liters System utility requirements are: Steam maximum 150 kg/h @ 6 bar g chilled water maximum 5.4 m3/hr 27 degrees C inlet temp compressed air 45 Nm3/hr @ 6 bar Motor: 3 phase Electric System accessories include a heating coil with 10 bar housing pressure for air heating, air inlet filters and cooler, 22 Kw system Fan rated for 10 bar/s, Airflow 0.25-0.83 m3/s at static pressure 10.00 pa; product filter with shaker discharge, and a bin lift system system Fan rated for 10 bar/s Airflow 0.25-0.83 m3/s at static pressure 10.00 pa product filter with shaker discharge, and a bin lift system Electrical controls available with unit Capacity: 240 L (63.4 gallons). Air Flow Rate: 2,800 m3/h (1,648 CFM). Pressure: 6 bar (87 psi). Bowl Diameter: 580 mm (22.8 in). Bowl Height: 500 mm (19.7 in). Orientation: Vertical. Product Density: 0.24 m3 (8.5 ft3). Operational Mode: Batch.
vibrating Fluid bed dryer system All contact parts are 1.4301, with CS frame Fluid bed size 480 mm wide x 6400mm long, overall 640 mm wide x 7356 length Covered drying bed with a vibrator system type SVi450/6n, driven by (2) Vibra-Maschinenfabrik electrical motors second motor: serial number 133138, 1,1kW / 50Hz/220-380V @ 940rpm System includes a GEA heat exchanger, a 5,25kW max. 3.000rpm Polrich blower type AS 56/RU315R/GR90MR driven by an electrical 7,5kW motor type KMER132Sx2ACP, serial number VDE0530, 3~/50Hz/380-660V @ 2.860rpm Bowl Diameter: 480 mm (18.9 in). Bowl Height: 6,400 mm (252 in). Orientation: Horizontal. Operational Mode: Continuous.
continuous vibrating fluid bed dryer perforated fluid bed openings: feed: 1-600mm, powder discharge: 1-300mm, top: 1-750mm manway, 1-450mm, straight side: 3-450mm manways, bottom: 2-625mm each with a 625mm diameter x 980mm straight side s/steel tank dryer mounted on carbon steel frame with springs Bowl Diameter: 1,100 mm (43.3 in). Bowl Height: 6,000 mm (236.2 in). Orientation: Horizontal. Operational Mode: Continuous.
vibrating fluid bed dryer vibratory mechanism 304 stainless steel perforated fluid bed openings: feed: 1-800mm, powder discharge: 1-635mm, top: 1-700mm manway, 2-600mm, 1-250mm, straight side: 3-500mm manways, bottom: 2-625mm, 1-500mm manway dryer with springs but no frame Bowl Diameter: 1,340 mm (52.8 in). Bowl Height: 9,600 mm (378 in). Orientation: Horizontal. Operational Mode: Continuous.
Capacity: 100 L (26.4 gallons). Air Flow Rate: 1,500 m3/h (882.9 CFM). Pressure: 3 bar (43.5 psi). Temperature: 70 °C (158 °F). Bowl Diameter: 750 mm (29.5 in). Bowl Height: 1,040 mm (40.9 in).
Air circulation fan is 12,5 KW, 50/220/380 Volt @ 3000rpm. Capacity: 500 L (132.1 gallons). Orientation: Vertical.
50 Kg With 2 stainless steel bins on wheels with Davidson "M" Series fan non-flameproof motor Unit complete with bag shaker, damper pulsator, temperature gauge and socks Dryer housing is carbon steel With on/off switch Unit rated @ 100-200 lb/hr. Capacity: 100 L (26.4 gallons). Pressure: 5.5 bar (80 psi). Temperature: 130 °C (266 °F). Bowl Diameter: 609.6 mm (24 in). Bowl Height: 355.6 mm (14 in). Orientation: Vertical. Operational Mode: Batch.
15 Kg bed dryer system Heating capacity 68000 BTU/hour Steam pressure 3 bar air (compressed) 6 bar with removable trolley Drying chamber in (3) sections: (1) 21 1/2" diameter x 12" straight side; (1) 21 1/2" diameter x 27 1/2" straight side; (1) 21 1/2" diameter x 27 1/2" straight side x 15 1/2" diameter (cone shaped). Hydraulic bin closure, (2) trolley for bin removal Unit with air filter, manufactured by HSE, Type 5.5KW-SCF, serial #2620 Motor: 3 phase (3) control panels, (1) built-on unit Top mounted fan driven by 4.5 KW, 3/50/440 volt, 2915 rpm non-flameproof motor. Capacity: 45 L (11.9 gallons). Air Flow Rate: 750 m3/h (441.4 CFM). Pressure: 3 bar (43.5 psi). Temperature: 70 °C (158 °F). Bowl Diameter: 393.7 mm (15.5 in). Bowl Height: 279.4 mm (11 in). Orientation: Vertical. Product Density: 0.04 m3 (1.41 ft3). Operational Mode: Batch.
120 Kg Rated approx. 871,000 Kcal/hour steam Heaters @ 6 bar, 330 Kgs/hour vapor consumption @ 3 bar and -10 degrees C/+80 degrees C 3 bar Motor: 3 phase 12090mm cylindrical type drying chamber with explosion door (2) 304 stainless steel product bins Bin dimensions: 500 liter, top 1200mm diameter x bottom 1000mm diameter Pneumatic bin locking mechanism, control panel Unit with all ancillaries Capacity: 420 L (111 gallons). Air Flow Rate: 5,000 m3/h (2,943 CFM). Pressure: 3 bar (43.5 psi). Temperature: 80 °C (176 °F). Bowl Diameter: 1,200 mm (47.2 in). Bowl Height: 1,000 mm (39.4 in). Orientation: Vertical. Operational Mode: Batch.
static fluid bed dryer system reference number K5/8-88-001A Bed temperature 100 - 120 degrees C Bed with (2) pneumatic operated hinged weir plates weir height range 140mm - 250mm Dryer chamber approx. 920mm wide x 5.8m long, chamber with 690mm wide x 1.3m high hinged inspection door Openings: drying air inlet 900mm, cooling air inlet 300mm, recycle 750mm, exhaust 500mm System consists of (1) air heater, aluminium fins with carbon steel tubes, rated 250 psi, (1) centrifugal cooling air fan, manufactured by Fans & Blowers, Ltd, serial # 6331 Motor: 3 phase (1) carbon steel cyclone, 1000mm top diameter x 1700mm straight side x 2000mm cone. Bottom outlet 350mm, straight side 760mm x 200mm, (1) exhaust/wet air fan, belt driven by 15 kw, 3/50/415V, 2940 rpm motor. (1) main dryer fan belt driven by 75 kw, 3/50/415V, 1470 rpm motor (no motor). Temperature: 120 °C (248 °F). Bowl Diameter: 920 mm (36.2 in). Bowl Height: 5,800 mm (228.3 in). Orientation: Horizontal. Product Density: 550 m3 (19,423 ft3). Operational Mode: Continuous. Dust Collection: Yes.
100kg system includes a filter housing, control panel, body (3) sections chamber top dish with cover 240mm high (total high with railing 560mm) x 1.180mm inside diameter first section 2.030mm long x 1.180mm inside diameter, second section 2.270mm long x 1.180mm inside diameter, third section 2.030mm long x 1.180mm inside diameter, with one product bowl High performance fan, type RHS1U280MBGXGR360, serial number 34117 Capacity: 300 L (79.3 gallons). Air Flow Rate: 5,472 m3/h (3,221 CFM). Temperature: 20 °C (68 °F). Bowl Diameter: 1,180 mm (46.5 in). Bowl Height: 2,030 mm (79.9 in).
load weight 300 kg special Vitamin-A-Pulver, with cyclones heater and cooler and de-dusting system Filter housing is 1.6m diamter, 2.5mm thick, with (59) bags, at the bottom of the filter housing is a tapered section that has a buterfly valve controling flow into the hopper bottom. Hopper bottom is 304 stainless steel (1.4301), 1190 mm diameter x 640 mm straight side with a 660 mm deep cone. Bottom hopper mounted on 4 legs with wheels. With seperate heating cooling box, rated - heater rated 320,000 Kcal/hr @ 5 atu, air cooler rated 400,000 kcal/hr @ 0/4 degrees c. Main fan is rated 14,000 CuM/Hr, 2900 upm, driven by a 35.8 KW, 3 phase 50 cycle, ExeG3 rated motor Capacity: 700 L (184.9 gallons). Air Flow Rate: 14,000 m3/h (8,240 CFM). Pressure: 5 bar (72.5 psi). Bowl Diameter: 1,190 mm (46.9 in). Bowl Height: 1,300 mm (51.2 in). Orientation: Vertical.
300 kg special Vitamin-A-Pulver with cyclones heater and cooler and de-dusting system Filter housing is 1600 mm diamter, 2.5mm thick with (59) bags at the bottom of the filter housing is a tapered section that has a buterfly valve controling flow into the container bottom Hopper bottom is 304 stainless steel (1.4301), 1190 mm diameter x 640 mm straight side with a 660 mm deep cone with a 660 mm deep cone. With separate heating cooling box, rated - heater rated 320,000 Kcal/hr @ 5 atu, air cooler rated 400,000 kcal/hr @ 0/4 degrees c. Main fan is rated 14,000 CuM/Hr, 2900 upm, driven by a 35.8 KW, 3 phase 50 cycle, ExeG3 rated motor. Capacity: 700 L (184.9 gallons). Air Flow Rate: 14,000 m3/h (8,240 CFM). Pressure: 5 bar (72.5 psi). Bowl Diameter: 1,190 mm (46.9 in). Bowl Height: 1,300 mm (51.2 in). Orientation: Vertical.
300 kg Glatt Fluid bed dryer special Vitamin-A-Pulver with cyclones heater and cooler and de-dusting system Filter housing is 1600 mm diamter, 2.5mm thick, with (59) bags, at the bottom of the filter housing is a tapered section that has a buterfly valve controling flow into the hopper bottom with a 660 mm deep cone Hopper bottom is 304 stainless steel (1.4301), 1190 mm diameter x 640 mm straight side with a 660 mm deep cone With seperate heating cooling box,rated - heater rated 320,000 Kcal/hr @ 5 atu, air cooler rated 400,000 kcal/hr @ 0/4 degrees c. Main fan is rated 14,000 CuM/Hr, 2900 upm, driven by a 35.8 KW, 3 phase 50 cycle, ExeG3 rated motor dedusting system rated 15000 CuM/Hr. Capacity: 700 L (184.9 gallons). Air Flow Rate: 14,000 m3/h (8,240 CFM). Pressure: 5 bar (72.5 psi). Bowl Diameter: 1,190 mm (46.9 in). Bowl Height: 1,300 mm (51.2 in). Orientation: Vertical.
Fluid Bed Dryer Spheronizer perforated bed electrical motor Motor: 3 phase type KPER200L4-TWS Capacity: 200 L (52.8 gallons). Air Flow Rate: 6,000 m3/h (3,531 CFM). Pressure: 0.5 bar (7.3 psi). Temperature: 60 °C (140 °F). Bowl Diameter: 1,450 mm (57.1 in). Bowl Height: 400 mm (15.7 in). Particle Coating Ability: Polymeric coating to spheres containing or layered with drugs, Layering spheres with drugs..
Glatt Fluid Bed Dryer perforated bed 400/690 volt Capacity 200 liter bin Capacity: 200 L (52.8 gallons). Air Flow Rate: 6,000 m3/h (3,531 CFM). Pressure: 0.5 bar (7.3 psi). Temperature: 60 °C (140 °F). Bowl Diameter: 1,450 mm (57.1 in). Bowl Height: 400 mm (15.7 in). Particle Coating Ability: Polymeric coating to spheres containing or layered with drugs. Layering spheres with drugs..
250 Kg Aeromatic Fluid Bed Dryer / Aeromatic fluid bed spray granulator Aeromatic type STRE 0, 86.20 H food grade high performance fluidized bed drying system rated 109,200 Kcal/hr Pressure shock resistance 2,0 bar, vessel volume 610 liter, 0,86m² The system includes dryer, powder filling station, pneumatic system, air and product filters steam air heater (CS) rated 5,5 bar @ 200 degrees C Cooler, and dry product containers Originally used for flour and starch drying in a food processing plant Rated for Flour: inlet moisture 14-16%,outlet moisture 7%,drying temp 70 C. Starch: inlet moisture 15-17%,outlet moisture 5%,drying temp 70 C. Capacity: 600 L (158.5 gallons). Air Flow Rate: 10,000 m3/h (5,886 CFM). Pressure: 5.5 bar (79.8 psi). Temperature: 200 °C (392 °F).
200 Kg polished 316 stainless steel bin with agitator dryer complete with steam heater and fan steam heater battery manufactured by Thermo Eng serial # 82347 test pressure 42 kg/square meter fan manufactured by Fan Systems, serial # 17162/1 belt driven by flameproof motor Capacity: 500 L (132.1 gallons). Bowl Diameter: 1,219 mm (48 in). Bowl Height: 431.8 mm (17 in). Product Density: 0.5 m3 (17.7 ft3).
25 Kg fluid bed dryer with steam heated jacket/battery flameproof motor with (1) 24" diameter x 13" deep bin Complete with socks, temperature gauge and bag vinch (manual) Bowl Diameter: 609.6 mm (24 in). Bowl Height: 330.2 mm (13 in).
Approx. 5 liter with temperature gauge and controls Includes dust socks Capacity: 5 L (1.32 gallons). Bowl Diameter: 228.6 mm (9 in). Bowl Height: 254 mm (10 in).
agglomerator spray arm Glatt WSG-60 range dryer
1-5 kg polished and sanitary Granulator, coater, pelletizer, & dryer This is a multi function machine, makes 10-30 mesh granules. With two product hoppers. Electrically heated coil rated for 9 kW, blower fan rated for 4 kW. With controls. Set up for local air intake and exhaust. Two internal bag filters with shakers. Compressed air requirement 0.2 m3/min.
GMP grade sanitary stainless steel construction order number V4635 vibration bed is belt driven electrical motor : type D160LA-6 , ExII3G, EExIIT4 system included with (1) 7m³ (1.4571) stainless steel silo manufactured by Scholl Switzerland AG order number 502838 serial number 201282 pressure rated -0,1/0,6 bar @ -20/120 degrees C (total volume 7100 liter) openings on top: (3) DN40, (1) DN50, (1) DN80, (1) DN100, (1) DN200, (1) DN500 manway cover; with (1) 4500 m³/h (1.4571) stainless steel radial fan manufactured by Reitz type KXE100-008030 serial number 166417 shaft rating maximum 20.17kW @ 3000rpm with frequency converter fan is coupling driven by a 37kW electrical motor, manufactured by Felten & Guilleaume, type CD200L2-2, serial number 415274001H, 3~/50Hz/400-690V/2955rpm, ExII2G, EEXdeIICT4, mounted on carbon steel baseplate; with (1) 1.2m² (1.4404) stainless steel plate heat exchanger, manufactured by Barriquand, type IJS, serial number 26361E, pressure shell side 2bar @ 200 degrees C (volume 16 liter), pressure plate side -1/6bar @ 200 degrees C (volume 2 liter), openings plate side: (2) DN25, openings shell side: (2) ½” (2) DN80; with (1) 44.3m² (1.4404) stainless s teel plate heat exchanger, manufactured by Barriquand, type IJMASC, serial number 26362E, pressure shell side 2.9bar @ -35/100 degrees C (volume 335 liter), pressure plate side 10bar @ -35/50 degrees C (volume 165 liter), openings plate side: (2) DN80, openings shell side: (1) DN25, (2) DN250; with (1) 12.7m² (1.4404) stainless steel plate heat exchanger, manufactured by Barriquand, type IJS, serial number 26359E, pressure shell side: 2 bar @ -20/200 degrees C (volume 190 liter, pressure plate side: -1/6bar @ -20/200 degrees C (volume 25 liter) openings plate side: (2) DN50, openings shell side: (2) ½” (2) DN250; with (1) 3.6m² (1.4435) stainless steel shell and spiral tube condenser, manufactured by Züricher Apparatebau, order number 105074, serial number 242, pressure tube side: 7.8bar @ -30/200 degrees C, pressure shell side: -1/6bar @ -30/200 degrees C, 500mm diameter x 1039mm length; with (1) 6m² (1.4404) stainless steel shell and tube condenser, manufactured by Züricher Apparatebau AG, order number 502637, serial number 1789, pressure shell side: -1/6bar @ -45/200 degrees C (volume 74 liter), pressure tube side: -1/8bar @ -45/200 degrees C (volume 45 liter), openings tube side: (2) DN50 (1) DN100, openings shell side: (2) DN40; with (1) 4.7m² (1.4404) stainless steel plate heat exchanger, manufactured by Barriquand, type IJS, serial number 26360E, pressure plate side: -1/6bar @ -20/200 degrees C (volume 8 liter), pressure shell side: 2bar @ -20/200 degrees C (volume 102 liter) openings plate side: (2) DN25, openings shell side: (2) ½” (2) DN150; with (1) 4m³ (1.4435) stainless steel vertical agitated tank with half pipe coil jacket, manufactured by WAFAG, order number 89536, serial number 8379, pressure inside: -0.32/4bar @ -30/200 degrees C (volume 4340 liter), pressure jacket side: 7.5bar @ -30/200 degrees C (volume 176 liter), with a (1.4571) stainless steel 3-blade propeller agitator, order number 503049, with mechanical seal, manufactured by Burgmann, type M481K-D20/60, pressure -1/16bar @ -30/200 degrees C, with 3 liter lubricator, manufactured by Aerni, type A-139, pressure 26bar @ 200 degrees C, agitator is driven by a gear, type RXF97D4/P, gear is belt driven by a 7.5kW electrical motor, manufactured by ABB, type 132M-4, 3~/50Hz/400V/1450rpm, EExdeIIBT4, openings top: (1) DN500 including (2) DN100 sight glasses, (1) DN600 including (2) DN50 and (1) DN300, (2) DN100, (3) DN200, openings bottom: (1) DN65, openings half pipe coil: (2) DN40, mounted on (4) lugs; with (1) 316L stainless steel vertical cyclone separator, manufactured by Ventilex, order number 502845, openings top: (3) DN25, (1) DN200, (1) DN300, openings side wall: (1) DN300, with cone bottom, mounted on (4) lugs; with (1) 14m³/h by 20m head (1.4408) stainless steel caned motor pump, manufactured by Ruetschi, type SMN-G5-160SR5E16-2V, order number 502627, driven by a 5.6kW electrical motor, type SR5E16-2V, 3~/50Hz/400V/2930rpm, EExdeIICT4; with (1) 2000mm diameter (1.4404) stainless steel vertical dust filter, manufactured by Ventilex, order number 502846, bolt dished top and weld dished cone bottom, 2000mm diameter x 3000mm straight side (4580mm overall length), (52) 316L stainless steel inlets, 145mm diameter x 2500mm length, openings top: (2) DN25, (3) DN100 sight glass, openings side wall: (2) DN300, (2) DN 200 sight glass, (4) DN50, (8) DN15, (7) 1”, opening cone side wall: (1) 500mm diameter manway cover, opening bottom: (1) DN200, mounted on (2) lugs; with (1) 316L stainless steel discharger valve, manufactured by Matcon Pressure: 6 bar (87 psi). Temperature: 120 °C (248 °F). Bowl Diameter: 862 mm (33.9 in). Bowl Height: 820 mm (32.3 in). Orientation: Horizontal. Operational Mode: Continuous.
250 Kg Fluid Bed Dryer batch type Steam heater rated 140000 Kcal/hr steam Motor: 3 phase 220/380 volt With (2) product bins 1200mm upper diameter, 800mm lower diameter, sanitary polished Drying chamber 3.5m high (11'6") x 1.2m diameter (48") With a control panel indicating air temperature, timers, intervals, vibration indicator of dust collector Capacity: 420 L (111 gallons). Air Flow Rate: 5,981 m3/h (3,520 CFM). Pressure: 6 bar (87 psi). Bowl Diameter: 1,200 mm (47.2 in). Bowl Height: 3,500 mm (137.8 in). Product Density: 0.42 m3 (14.8 ft3). Operational Mode: Batch. Dust Collection: Yes.
fluid bed dryer system 50-250 Kg With cylindrical chamber the rupture channel 950mm dia x 2345mm high Filter housing rated 2 bar and has volume of 1638 liter. Filter area 13 sq meter. W/(2) 304SS product bins, rated 2 bar, w/volume of 340 liter, base area of bin 0.45 sq meter, 1100mm/750mm dia x 500mm deep, w/60mm x 270mm sight glass. Fine dust filter 19.3 sq meter. Steam air heater rated 467,2000 Kg/hr with air inlet of -10 deg C and outlet of +80 deg C. Steam pressure 4 bar. Fan rated 1.2 cbm/sec, static pressure 5000 N/sq meter, rated 8.5 KW @ 2900 rpm. With hydraulic operated bin loader Capacity: 340 L (89.8 gallons). Air Flow Rate: 3,600 m3/h (2,119 CFM). Pressure: 2 bar (29 psi). Temperature: 80 °C (176 °F). Bowl Diameter: 1,000 mm (39.4 in). Bowl Height: 2,496 mm (98.3 in). Operational Mode: Batch.
60-90 Kg batch Steam heated 62000 Kcal/hr Air capacity 60 cbm/min With drying cycle of 20-50 minutes static pressure 300mm WS Cabinet 1644mm wide x 1154mm deep x 2880mm overall height. (2) doors with sight glasses Capacity: 380 L (100.4 gallons). Air Flow Rate: 3,600 m3/h (2,119 CFM). Pressure: 0.29 bar (4.3 psi). Bowl Diameter: 100 mm (3.9 in). Bowl Height: 600 mm (23.6 in). Orientation: Vertical. Operational Mode: Batch.
60-180 Kg 510000 Kcal/hr W/(1) sanitary product bin 1100/750mm dia x 500mm deep on casters Control panel, steam heater Filter volume 1.638 cbm filter area 13 sq meter Air inlet temp -10 deg C, air outlet temp +80 deg C Steam pressure 6 bar Max steam consumption 240 Kg/hr Fan rated 1.2 cbm/sec Static pressure 6000 N/sq meter Fan speed 2900 rpm Air Flow Rate: 4,320 m3/h (2,543 CFM). Pressure: 2 bar (29 psi). Temperature: -10 °C (14 °F). Bowl Diameter: 1,100 mm (43.3 in). Bowl Height: 2,000 mm (78.7 in). Orientation: Vertical. Operational Mode: Batch. Dust Collection: Yes.
200-400 Kg Designed drying 200 to 400 Kg batches Housing type 105.4, made of 304SS Product bin type 202.3, 780 liter volume, 304SS 1630mm top dia, 1230mm btm dia x 880mm conical section. W/(2) 200mm inlet for adding products, 1-500mm manway w/cover, 1-200mm sight glass, 200mm x 60mm oval sight glass. Btm section below bin 1230mm dia x 500mm deep. Includes air inlet 500mm dia. Dryer body and product bin are mtd on steel stand w/legs, 1550mm x 1050mm x 3900mm high. Drying chamber has (2) explosion doors. Product filling nozzles for granulation are Type 2001.1, 304SS. System includes second product spray system Type 701, nozzle rated 4 liter/min. Feed pump rated 0.01 to 11 liter/min @ 2.5 bar Variable speed drive motor. XP rupture disc. W/centrifugal fan Type 5012, made of CS w/epoxy lining, rated 180 cbm/hr @ 500mm WA @ 2900 rpm. Steam coil rated 270,000 kCal/hr @ 6 ATU. Fine dust filter, Type 403.1, 23 sq meter filter area. Product empties from the btm of dryer into Frewitt (Switzerland) granulator, Type MGWI-624, 304SS, SN 0677449, feed 350mm x 500mm. . Driven by 1.1 KW, 3/50/220/380 volt, 1390 rpm motor, couples to variable speed gear reducer, Type R4S-1062-11-4, SN 304531, rated inlet speed 56/280 rpm, outlet speed 89/30 rpm. connecting ducts Capacity: 780 L (206.1 gallons). Air Flow Rate: 180 m3/h (105.9 CFM). Pressure: 0.05 bar (0.7 psi). Bowl Diameter: 1,630 mm (64.2 in). Bowl Height: 1,200 mm (47.2 in). Explosion-Shock Resistant: Yes.
4.5 Kg/hr plastic lab Plastic cylindrical housing 10" dia x 18" long cone com 4686 Manual shaker Approximately 15 liter fluid bed container. Capacity: 15 L (4 gallons). Bowl Diameter: 254 mm (10 in). Bowl Height: 457.2 mm (18 in).
250 Kg Steam heater rated 140000 Kcal/hr steam (2) product bins 1200mm upper diameter, 800mm lower diameter, sanitary polished with control panel indicating air temp, timers, intervals, vibration indicator of dust collector Capacity: 420 L (111 gallons). Air Flow Rate: 5,981 m3/h (3,520 CFM). Pressure: 6 bar (87 psi). Bowl Diameter: 1,200 mm (47.2 in). Bowl Height: 3,500 mm (137.8 in). Operational Mode: Batch. Dust Collection: Yes.
150 Kg 110,000 Kcal/hr steam heating with dust collector bags and bag hanger ring Capacity: 400 L (105.7 gallons). Pressure: 6 bar (87 psi). Operational Mode: Batch. Dust Collection: Yes.
5 Kg Aeromatic spray granulator system Rated 6800 kcal/hr Fan driven by 3.4 PS Drying product bin 700mm dia top, 270mm dia btm x 650mm deep Control panel w/switches Including steam heater, valve, duct Capacity: 200 L (52.8 gallons). Bowl Diameter: 700 mm (27.6 in). Bowl Height: 1,000 mm (39.4 in). Orientation: Vertical. Operational Mode: Batch.
100-150 Kg Steam heated 200000 Kcal/hr Fan driven by 20 KW motor Drying cycle 20-50 min Fan speed 1450 rpm 100 cbm/min air capacity Static pressure 300mm WS (2) sanitary product bins 580 liter volume, 1200mm top diameter x 600mm straight side Dryer chamber including fan motor (2) doors with sight glasses With hydraulic lift for bins drainage Capacity: 580 L (153.2 gallons). Air Flow Rate: 6,000 m3/h (3,531 CFM). Orientation: Vertical. Operational Mode: Batch.
60-180 Kg Rated 467200 Kg/hr air flow with a Control panel, steam heater, and (2) sanitary product bins 1100/750mm dia x 500mm deep Capacity: 200 L (52.8 gallons). Air Flow Rate: 1.2 m3/h (0.71 CFM). Pressure: 2 bar (29 psi). Bowl Diameter: 1,100 mm (43.3 in). Bowl Height: 1,700 mm (66.9 in).
30 KG capacity with a mirror polish finish internal and a matt finish external Pharmaceutical GMP rated, and sanitary construction 18KW Electric Heater with a Drying temperature (60 C - 70 C) Compressed air: 6 bar 5.5 KW blower Motor 3/60/220V Overall Dimensions 1250mm L x 1345mm W x 2865mm Approx. Weight 1250 KG. Capacity: 110 L (29.1 gallons). Air Flow Rate: 2,000 m3/h (1,177 CFM). Pressure: 6 bar (87 psi). Temperature: 70 °C (158 °F). Orientation: Vertical. Operational Mode: Batch.