Centrifuges from IPP. Over 474 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.

• Internal Rated 0.7 PSI @ 170 degrees F.
• Electromechanical drive system
• 42" x 12' 6" frame, axial motor, 4080 mm long x 2065 mm wide x 1900 mm high

wall thickness 25 mm
belt driven by 45 kw motor, 3/50/380-660 volt,
80mm feed, 300mm discharge on front door,
260mm wide x 660mm long filtrate, central lubrication system, and controls

top load, bottom discharge,
12mm thick basket,
3.15 square meter filter area,
1100 rpm permissible speed
single motion plow driven by a hydraulic powerpack, powerpack driven by approx 0.75kw EX motor, mounted on a steel baseplate,

• Pharmaceutical design. This centrifuge has a clear distinction between the process area/clean room and the drive area. The processing area is free of dead space and allows for complete inspection and sterilization.
• The filter medium is installed inside the cantilever mounted screen basket.
• This centrifuge is Gas tight (over -pressure) to 0.04 bar. With feed and wash pipes, hydraulic plow with pneumatic heel cake removal system and solids discharge chute, with door lock switch.
• Internal accessories are Hastelloy C-22, Gasketing is PTFE.
• Internal appears to have a buff polish.

• Centritec Cell 8 single use insert centrifuge
• This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disposable, Precise servo drive system that minimizes vibration, User friendly, and low maintenance. Cells are pumped peristaltically from the bio reactor to the cell 8, Live cells can be recycled to the reactor, separation occurs in a gamma irritated disposable bladder and tubing system (Separation Insert) The process is three steps separation, isolation, and discharge. An inflatable barrier segregates cell rich material for the superannuant Min/Max Temp=2 -150 degrees C. (this machine has been modified with switches ,plc, and others to control temperature at an exact setpoint) Separation chamber volume 200 ml. Through put 6-120 L/Hr. Width 32.23 ", depth 46.86 ", height 67.99" Weight 640 kg.

clarifier basket centrifuge
bottom discharge
(2) horizontal baffles
basket capacity 7.6 cu ft.
316SS basket, curb and plow
Top driven by hydraulic powerpak
Hinged access port
1" rotary pneumatic skimmer

basket only
1/4 " drainage holes
Eight 7/8" bolt hole pattern

Podbielniak counter current extracting centrifuge
job number 106-102
Bowl is 38" OD x 39" Long
Hinged 304SS cover
CS coated bottom housing
Unit has a 2" feed pipe,
3" outlet on bottom housing
230/460 volt motor
with VFD controller
Drive dimensions are 48" x 40" x 30" high

• Contour screen bowl centrifuge.
• Reliance 444T frame TEFC motor
• Oil system driven by a Reliance143T TECF, 1 hp 3/60/460 volt motor

Podbielniak counter current extracting centrifuge
Job # 106-101
Bowl is 38" OD x 39" Long
Hinged 304SS cover,
CS coated bottom housing
Unit has a 2" feed pipe,
3" outlet on bottom housing
230/460 volt motor
with VFD controller
Drive dimensions are 48" x 40" x 30" high

All wetted parts are 316SS electro polished to 180 grit
Designed for 10 to 30 gpm feed rate
The unit has EPDM seals and a polypropylene filter cloth
The axial drive is 1 HP 3/60/460 volt 1800 rpm.

cake capacity 55 liter
centrifugal force: 1250 xg
with translation powe rpack, with filtrate discharge tank 875 mm diameter x 700 mm straight side with a 500 mm top opening,,
mounted on stand,
with control cabinet and stairs

wall thickness 25 mm
class B IP 54
with central lubrication system
No controls

peeler centrifuge
with a 0.12kw, 3/50/230/400 volt, 1360 rpm fan motor,
discharge screw/plow driven by 2.2kw, 3/50/400 volt
Ex motor, hydraulic door locking mechanism and cake thickness device driven by a hydraulic pump with a 0.75kw, 3/50/400 volt Ex motor, hinged front door, 1-200mm discharge,
1-250mm filtrate with s/steel tank,
centrifuge with (1) Siemens OP37 controller,
(1) s/steel GAF filter, (1) diaphragm pump,
(1) 600ltr plastic tank, 900mm diameter x 1m high,
(1) s/steel centrifugal pump, manufactured by SERO, type SEMA-3111-75-2.32,
(1) 35ltr Schott glass reciever, (2) flow meter, (2) pneumatic valves, (1) main control panel

spare
top and bottom section
bottom discharge basket centrifuge
bottom discharge design

• 316L stainless steel hinged front cover,
• cake discharge via a pivoting peeling device equipped with a broad peeler knife,
• cake level gauge,
• centrifuge on anti-vibration rubber mountings

• Halar lined basket

single lead conveyor
w/hardfacing
Used on Dorr Oliver 16L and Flottweg Z3L

2-chamber bowl clarifier centrifuge.
Complete with bowl, parts and tools in separate crate.

with single action pneumatic operated plow cylinder.(no Plow)
Cover has an inspection door with a 9" sight glass
Cover has the following openings for piping connections
One, 6" weld neck flange,
One 2" opening for feed pipe,
Three, 1" opening for accessories.

• CE Ex II 2 Gc T4 classification,
• top load bottom discharge,
• perforated basket,
• basket aperture 1120mm,
• centrifugal acceleration 503g,
• basket underdriven by 37/43kw, 3/50-60/690-400/660-380/415-440 volt 987/985/988/1184 rpm EEx de IIC T4 IP55 ATEX motor,
• full opening clamp dished top with hydraulic assist,
• hydraulic driven plow,
• both driven by the same power pack,
• power pack driven by 2.2kw, 3/50/400 volt 1500 rpm EEx de IICT4 IP55 motor, motorised filling disc driven by 5.5/6.3kw, 3/50-60/690-400/660-380/415-440 volt, 1448/1439/1452/1740rpm EEx de IIC T4 IP55 ATEX motor,
• centrifuge used with nitrogen,
• 200mm liquid outlet,
• mounted on a 316L stainless steel frame with rubber mountings,

• nozzle type disk bowl centrifuge,
• 5440 rpm,
• 1.03 kg/dm3 heavy liquid,
• 1.07 kg/dm3 solid,
• hinged top cover,
• driven by 45kW, 3/50/380 volt 1470 rpm IP55 motor,

500/410mm
two stage pusher centrifuge
5.5 ton/hour solids throughput,
residual moisture 3% by weight,
wash medium is pure condensate @ 50 degrees C,
pusher driven by 22kw (30hp), 3/50/400/690 volt 2945 rpm IP55 (equivalant to EX class 1 Div 11) motor, basket sieves with 65 slots, slots outer 0.15mm, inner 0.18mm, approximately 86 to 60 strokes per minute, rotary labyrinth seal, feed pipe, wash pipes with nozzles for each basket, bottom solids discharge

Designed for food grade and acceptable for use in Class 1 Div 2 group D areas and is fume tightSP. Rated for 10,600 lbs./hr. of feed, 9100 lbs./hr. of centrate and 1500 lbs./hr.cake. Rated for 80 degrees F.Bowl has special abrasion protection on the feed and conical section of the machine.Includes vibration sensor. Control panel includes PLC for automated dewatering. Only 30 hours of operation!

• nozzle type disk bowl centrifuge,
• 5440 rpm,
• 1.03 kg/dm3 heavy liquid,
• 1.07 kg/dm3 solid,
• hinged top cover,
• driven by 45kW, 3/50/380 volt 1470 rpm IP55 motor,