Filtration Area
Measure
Quote Cart
Buy your unused & surplus, second hand / used Pressure Leaf Filters from IPP. Choose from 75 models in stock now for immediate delivery.
Highest-ranked available inventory for this selection.
Buy your unused & surplus, second hand / used Pressure Leaf Filters from IPP. Choose from 75 models in stock now for immediate delivery.
Select one or more values to narrow the current listings.
Use this setting to include or exclude equipment with this feature.
Use this setting to include or exclude equipment with this feature.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Enter a keyword to match this specification.
Use this setting to include or exclude equipment with this feature.
Set a numeric threshold to narrow the matching listings.
Enter a keyword to match this specification.
Showing 25 of 75 matching Pressure Leaf Filters.
500 Gallon Manufactured by Alloy Fab for Dartco Shell is .250" thick Top head is .312" thick Cone is .312/.437" thick jacket is .109" thick6.5 turns half pipe on top head18 turns half pipe on straight side5 turns half pipe bottom head All half pipe jacket is 2"
Funda filter with centrifugal discharge
Shell 900mm diameter x 960mm from flanged top to bottom discharge
(22) 800mm diameter filter elements @ 30mm spacing
Requires 15 PS motor
Wet cake discharge
Manufactured by Durco Enzinger
Vertical tank
horizontal Plate design,
with wet cake discharge, with Slucing bar
SS bolt on plate coil jacket on bottom head
with bolted dished bottom with swing bolts
Mounted on top is a faractioanl HP drive that turns the slucing bar that rund down the middel of the plate stack
6" diameter bottom cake discharge
Fundabac filter
Volume: 165 liters
Pressure rating: -1/10 bar @ 0/200 degrees C
with 3 filter candles,
Fundabac Filter
970 liter capacity, jacket is 170 liters
Centrifugal discharge pressure leaf filter
CS jkt
(18) vert filter plates
Swing bolt dish top
141" thick. 1-6" center btm outlet
1.4401/1.4571 (316SS/316SS/TI) horizontal tank
Rated 4 ATU @ 120 degree C
Filter housing retracts on an overhead rail for cleaning the filter
(1) clamped head with ratchet closure
Equipped with (30) leaves
Filter housing has cake level detector and wash nozzles for the leaves mounted under the leaves fixture
Equipped with (3) 1.4571 cake bins, 800mm wide x 1700mm long with casters
Floor space requirements: 6500mm long x 1600mm wide x 2600mm high
Designed to German TUV standards
vertical leaf pressure filter
Pressure rating: 4 ATU
Filter housing retracts on an overhead rail for cleaning the filter.
Filter tank 1200mm diameter x 2100mm straight side,
(1) welded dished head, (1) clamped head with ratchet closure
(30) leaves. Filter housing has cake level detector and wash nozzles for the leaves mounted under the leaves fixture.
Equipped with (3) 1.4571 cake bins, 800mm wide x 1700mm long with casters.
Designed to German TUV standards.
Cake Discharge: Dry, suitable for direct or pre-coat filtration
Number of Filter Screens: 22
445 gallon
20 HP 3/60/230/460 volt
Additional Features: Includes a spare filter plate pack.
1090 liter - volume measurement in liters
jacketed - type of equipment
centrifugal discharge pressure leaf filter - type of filter
Rated 72 PSI @ 302 degrees F internal; 72 psi, 90 liter @ 302 degrees F in the jacket
(15) plates - number of plates in the filter
on 80 mm spacing - distance between plates
55mm cake thickness
Vessle is 1000 mm diameter.
0.42KW drive for centrifugal cake discharge
vessel # 5293GW
rated inside -1/6bar
volume 1.000 liter
rated jacket -1/6bar
volume 110 liter,
vertical jacketed
centrifugal discharge.
Cake capacity 0.45 cubic feet.
Certified by Votator Corp
horizontal plate design
thru Falk gearbox, input 1750, ratio 6.246:1, output 290
Shell is 0.375 " thick
head is 0.375" thick,
head is 0.500" thick
design pressure 5.69 bar @ -29/+60 deg C
Shaft seal: Packed gland
built to ASME V111 div 1
vessel volume 5250 liter
approx 1.6m diameter x 1.6mm straight side vertical chamber, approx 300mm discharge, mounted on (3) stainless steel legs,
associated equipment includes 1 x 3000 liter vertical stainless steel pressure tank,
pressure 0,5 bar to 20°C, 1.4m diameter x 1.4m straight side, weld dished top, weld coned bottom, mounted on 3 legs, 1 x approx 600 liter stainless steel tank with agitator, 2 x diaphragm pumps, 1 x Hilge centrifugal pump.
Shell manufactured by BHS, Serial 329063
Glass #8000.
with 7-internal filter plate. full vacuum (810 liter)
Feed has 2-50mm w/(2) vibratory feeders
Top has additional 4-100mm nozzles
Bottom discharge is 500mm
Horizontal plate design
Centrifugal discharge driven by 40 HP, 3/60/230/460 volt, 1775 rpm motor thru Falk gearbox
input 1750, ratio 6.246:1, output 290
15mm (0,6") thickness horizontal filter plates.
5 cubik feet cake capacity.
650mm diameter (26") x 750mm (30") straight side vertical chamber
Capacity: 760 liter
Temperature Range: -25/200 deg C
driven by hydraulic
Filter type: Ecofilter
-10 to 50 deg C
Vertical tank,
horizontal leaf design with centrifugal cake discharge.
Includes feed pump.
built on control panel
Funda filter
Chemap WA number: 6470
3/50/220/380 volt
pressure bag filter,
moduline Qic-Lock maxiline,
working pressure 10 bar @ 120 degrees C (185 liter)
(4) 165mm diameter x 710mm long bags,
Connections DN50 (2")
70 ltr
pressure filter
Centrifugal discharge packing gland on shaft
Motor: 220/480 V
jacket 1,9 bar at 150°C
(10) 316Ti stainless steel filter leaves
Mechanical seal on shaft,
carbon steel half pipe coil on bottom head
Filter volume 670 liter
Used filters are essential components in countless process operations where solids must be separated from liquids. Whether you’re removing fine particulates, clarifying solutions, or recovering valuable materials, industrial filters play a critical role in improving product quality, protecting downstream equipment, and maintaining compliance. With more than 47 years of experience, IPP supplies used, secondhand, and surplus filters from 20 global plant sites and maintains an extensive inventory of 15,000+ process systems.
IPP stocks a wide range of filter types—pressure leaf, plate and frame, cartridge, vacuum drum, nutsche, and candle filters—from leading brands like Sparkler, Pall, Funda, and Millipore.
Industrial filters are built to resist corrosion, handle pressure, and maintain hygiene:
Learn more about industrial filtration technologies and applications from Chemical Processing.
Search the IPP inventory or contact IPP’s filter experts to locate the right used, surplus, or secondhand filter for your process. With trusted manufacturers, quality systems, and rapid delivery, IPP helps you reduce downtime and improve filtration efficiency.
Have questions about Filters or our services? Learn more about our products and why customers choose IPP.
