Search our inventory of over 15,000 new and used industrial equipment. Filter by manufacturer, material of construction, industry uses, and technical specs.
Search our inventory of over 15,000 new and used industrial equipment. Filter by manufacturer, material of construction, industry uses, and technical specs.
Showing 25 of 11075 matching equipment.
20 Ton , 3000 SCFM Roof top heat and ac system--12 SEER
UNUSED
Internal finish 240 grit buff polished-Bright polished, external buff polish to a matte finish. ASME NB rated, and "U" stamped.
welded dish heads (2:1) 12 mm thick
Coil: 114 mm OD x 4 mm thick,
Limpet covers bottom dish and 2615 mm of straight side (pitch 150mm). Coil heating surface area.
With Insulation rings and upper drip ring. Two top lifting lugs and one tailing lug.
20" Manhole with Cover and davit arm assist, one 6" sight glass, Support Type: Lugs.
SAA #2000-168, natural gas fired, continuous, comp ratio 9/1, min.WKI 91, ignition timing (BTDC) 11-02, service 4650 HP (3469 Kw), altitude limit 500 feet (152 meter), governed speed 1000 rpm, 0.80mm valve intake & exhaust clearance, firing order 1R-1L-4R-4L-7R-7L-6R-6L-8R-8L-5R-5L-2R-2L-3R-3L, AC generator (alternator) manufactured by Leroy Somer, type LSA-56-BM65-6P, serial #167056-2, IP 23, 3360.8 Kw, 4201 kVA power rating, 11000 volt, 220.5 Amp, 3 phase, 50 Hz, 1000 rpm, excitation AREP, all mounted on a carbon steel skid
electronic intermittent pilot ignition
Surface heating area, 83.4 Sq. Ft.
Gas connection is 1.25", water inlet and outlet are 2", and pressure relief line is 1"
Flue size is 12".
jacketed Loedige ploughshare mixer with choppers
machine #7644
behalter #1952
jacket pressure 0.5 bar @ 110 deg C (180ltr)
chamber 1110mm diameter x 2960mm straight side, internal rotor with (10) plow blades and (2) end blades, blades are removable
via a reduction gearbox, packed gland on shaft, c/steel jacket on straight side only. (4) 321 s/steel choppers each belt driven by a 2-speed motor 7.5 kw 3/50/230/460/380/420 volt, 2950 rpm or 8.5 kw, 3/60/440/480 volt, 3510 rpm
(8) spray nozzles, openings top: 3-350mm, jacket: 6-50mm, straight side: 2-540mm wide x 400mm high inspection doors, 2-50mm (for probes), bottom: 3-300mm long x 200mm wide each with a pneumatic operated valve, 8-25mm (spray nozzles,
Single Use Fermenter
stainless steel (polished) Frewitt Delumper with crushing and grinding system, type Delumpwitt, upto 9000kg/hr flow rate, system includes: (1) stainless steel Frewitt Conwitt 250 conical sieve mill, serial #12014519069, internal CE 1258 Ex II 1Dckb T157 degrees C X, external CE Ex II 3D c Ex tD T125 degrees C X, (1) stainless steel infeed hopper, (1) stainless steel Frewitt crushing unit, serial #12014532028, internal CE 1258 Ex II 1Dckb T157 degrees C X, external CE Ex II 3D c Ex tD T125 degrees C X, (1) Frewitt Conwitt 250 vibrating unit, serial #1201459069, internal CE 1258 Ex II 1Dckb T157 degrees C X, external CE Ex II 3D c Ex tD T125 degrees C X, (1) servolift elevating/lifting machine, serial #12885, all mounted on a stainless steel frame
wall thickness 25 mm
belt driven by 45 kw motor, 3/50/380-660 volt,
80mm feed, 300mm discharge on front door,
260mm wide x 660mm long filtrate, central lubrication system, and controls
UPZ 315 highly polished 316L stainless steel fine impact mill with pin disc grinding system consisting of:
(1) UPZ 315 highly polished 316L stainless steel pin disc mill, manufactured by Hosokawa, serial #P1 125 630/1, asset #12302, 4500 rpm,(max 9200 rpm), permissible overpressure 0.09 bar @ 50 degrees C, inside 34 liter, pin size 7mm diameter x 35mm long, (236) pins on door side, (231) pins on drive side, plate beater diameter 298mm, (10) plate beaters, mill driven by approx 18kw motor
(1) 13.5 square meter 316L stainless steel vertical heat exchanger (gas cooler), manufactured by Transitherm GmbH, type WTGDP 273/2400 1-PASS, fabrik #10830, design pressure tube side -1/10 bar @ -29/100 degrees C (82 liter), shell side -1/10 bar @ -29/100 degrees C (76 liter), TUV, (132) 14mm diameter x 1 x 2.4m long 316L stainless steel tubes, single pass tube side, 273mm diameter 316L stainless steel shell
(2) 316L stainless steel heads with 90 degree bend, openings tube side each head with a 150mm, shell: 2-75mm, mounted on lugs
(1) stainless steel screw feeder
(1) 22 square meter polished 316L stainless steel reverse jet dust filter, manufactured by Hosokawa Alpine, type AR 34 M, serial #P1 140 710/1, pressure -0.1/+0.49 bar @ -29/80 degrees C, stainless steel polished to Ra max 0.5um, 1.3m diameter x 2m straight side x 1250mm bottom cone section, clamp bonnet head, (34) 130mm diameter x 1820mm long internal filter cages, 6-sets of valves
(1) highly polished 316L stainless steel cantilever rotary sifter, ATEX zone 22, manufactured by Kemutec Powder Technologies Ltd, type K650C sifter, serial #K650C A10942/1, asset #12230, working pressure -0.1/0.49 barg, design temperature 40 degrees C max, driven by 2.2kw, 3/50/415 volt 1500 rpm EExde IIB T4 zone 1 & 22, motor, mounted on a stainless steel frame with wheels
(1) 25m3/hr @ 7.06m head 316L stainless steel centrifugal pump, manufactured by HMD Sealless Pumps, serial #824545, type GSI 80-50-200 D-4A, NPSHa 19.68m, driven by 1.1kw, 3/50/415 volt 1450 rpm EExd IIB T4 motor, mounted on a baseplate
(1) 15 m3/minute 316L stainless steel Radial blower/fan, manufactured by Reitz, type single stage KXE080-001430-00, serial #175747, total pressure increase 746 daPa, impellor speed 3000 rpm, inlet size 140mm, discharge 100mm, driven by 7.5kw, 3/50/415 volt 3000 rpm EExdeIIBT4 motor
(1) 160mm diameter polished 316L stainless steel motorised rotary valve, manufactured by Engelsmann, type ZSA 200, driven by 0.55kw, 3/50/415 volt 10 rpm EExdIICT4 motor
(1x) stainless steel Lowbotech discharge unit with metal detector
(1x) 316L stainless steel Matcon Hopper discharge unit,
Part number: BN117 4
Additional equipment: vacuum receiver
SIHI stock number 900256, mechanical seals on shaft
with vacuum receiver
C 3-stage reciprocating Boil-off-gas (BOG) compressor system
maximum allowed rod. Load 100kN, rated discharge pressure of final stage 69 barg, suction pressure 1st stage 0.05 bar @ 30 degrees C, 2nd stage 4.6 bar @ 45 degrees C, 3rd stage 27.7 bar @ 45 degrees C, discharge pressure 1st stage 4.7 bar @ 176 degrees C, 2nd stage 27.9 bar @ 190 degrees C, 3rd stage 69 bar @ 160 degrees C, driven by a 250kw, 3/50/400 volt, 594 rpm ATEX 1022 EExd II B T4Loher motor, (1) 550 liter stainless steel vertical pulsation dampner vessel, manufactured by Nadoba Stabilini, serial #954, pressure 0.05 bar @ -118/+30 degrees C, 610mm diameter x 1740mm straight side, weld dished top and bottom, (1) 125 liter carbon steel horizontal pulsation dampner, manufactured by Tlakova Nadoba Stabilini, serial #955, pressure 10.7/69.6 bar @ 57/159 degrees C, weld dished ends, (1) carbon steel tube and shell horizontal 1st stage intercooler, manufactured by APL Apparatebau AG, serial #W8227/EC22601, tubeside pressure 10 barg @ -10/200 degrees C (27 liter), shell 10 barg @ -10/200 degrees C (53 liter), (1) carbon steel tube and shell horizontal 2nd stage intercooler, manufactured by APL Apparatebau AG, serial #W8228/EC22602, tubeside pressure 29 barg @ -10/200 degrees C (20 liter), shell 10 barg @ -10/200 degrees C (55 liter), (1) carbon steel tube and shell horizontal 3rd stage intercooler, manufactured by APL Apparatebau AG, serial #W8229/EC22603, tubeside pressure 78 barg @ -10/200 degrees C (9 liter), shell 10 barg @ -10/200 degrees C (42 liter), system also includes interconnecting pipework, valves, etc, ALL CE MARKED
Nash SC2SS Vacuum pump, with vapor recovery system
Test # 90Y002
The system includes the following equipment; a vacuum pump, two heat exchangers, a separating tank, and seal pots. The direct drive vacuum pump, is manufactured by Nash, size SC2SS, Pos. 4 ,Vac, rated 200 cfm @ 5-20" Hg.
The vapor exchanger is a 30 sq. ft., all 316 SS, horizontal heat exchanger manufactured by Industrial Process Equipment corp., Model # 2ST8-60, Serial # 105-641A
National Board # 988
It’s shell and tubes are rated for 150/FV
The condensate chiller is a 10 sq.ft., 316SS tube bundle, 316SS heads, with CS shell, horizontal heat exchanger and is also manufactured by Industrial Process Equipment Corporation. Serial # 1056413, and National Board # 989, Rated for 150/FV psi in the shell and tubes.
The dual seal pot arrangement, with Nitrogen purge is provided by Duramettalic, Canada/Condex Heat Transfer Corp. Serial # 91-3-4146 & 4179, and rated for 400 psi at 400 degrees F. Both have level sight glasses and N2 purge line with regulator and Liquid make up valves. The units 316 SS separator, is manufactured by Jenco, Serial # 91-1327, National Board # 525, and rated for 30/FV at 350 psi. The separator tank also has a liquid level sight glass. The vapor inlet line is 4" flanged, and separator outlet is 1”. Automatic valves for liquid flow control are provided by Fisher and El-O-Matic, and the vapor contact piping is 316 SS. System includes all DP cells, RTD temperature probes, and pressure gauges. Designed to be used in a hazardous atmosphere, skid has a 60 amp Square D breaker, and explosion proof switches and controls.
NFPA
class A drum warming oven.
designed for BOC Anhydride and acetic acid
Purge time 10 minutes
input 124,000BTUH at 75 psi
Complete with fire protection and controls.
500 lbs./day Ozone Generator Skid mounted design includes generation chamber, controls and transformers in cabinet.
Rated for 500-250 lbs./day Oxygen/Air : 70-77 scfm @ 40-104 degrees F, 43.5-116 psi Output 68.7-76.5 scfm at 17-36 psi operating pressure Cooling water: 45 psi max., @35-86 degrees F at 50 gpm Electricals: Cooling water: 45 psi max., @35-86 degrees F at 50 gpm Chamber size: 20" diameter x 109" long.
with feed hopper
serial #10 486
SIHI vacuum skid
consisting of (1) 140m3/hour carbon steel liquid ring vacuum pump
3 bar
(1) 4 liter carbon steel separator vessel, pressure -1/3 barg @ 120 degrees C
273mm diameter x 1020mm total height, (1) 9.9 square meter carbon steel condenser, pressure tube side 6 barg @ 250 degrees C, shell -1/3 barg @ 250 degrees C,
Manufactured by Estrella AG in Ettingen, Germany
Packed column consisting of (3) Clamped mid sections,
each 2.000 mm long x 788 mm inside diameter,
openings each section: (1) NW 150, (1) NW 50;
(1) clamped dished top, 1.120 mm long x 788 mm inside diameter
600mm inside diameter x 14.200mm overall height glass packed column.
Manufactured by Schott Schleiffer Chemie-Technik in Switzerland
Number of main parts: 13
Number of glass middle sections: 11
Glass cover top height: 400mm
Glass cover top inside diameter: 600mm
Glass cover top openings: (1) NW 200, (2) NW 25
Glass cover bottom height: 300mm
Glass cover bottom inside diameter: 600mm
Glass cover bottom openings: (1) NW 100
First middle section height: 600mm
First middle section inside diameter: 600mm
First middle section opening: (1) NW 80
Second middle section height: 1.500mm
Second middle section inside diameter: 600mm
Second middle section openings: (2) NW 50, (2) NW 25
Third middle section height: 1.500mm
Third middle section inside diameter: 600mm
Third middle section openings: (3) NW 50
Fourth middle section height: 1.500mm
Fourth middle section inside diameter: 600mm
Fourth middle section openings: (2) NW 25, (1)
Fifth middle section height: 1.500mm
Fifth middle section inside diameter: 600mm
Fifth middle section openings: (2) NW 25
Sixth middle section height: 600mm
Sixth middle section inside diameter: 600mm
Sixth middle section openings: (1) NW 80
Seventh middle section height: 1.500mm
Seventh middle section inside diameter: 600mm
Seventh middle section openings: (2) NW 50, (2) NW 25
Eighth middle section height: 600mm
Eighth middle section inside diameter: 600mm
Eighth middle section openings: (1) NW 150
Ninth middle section height: 1.500mm
Ninth middle section inside diameter: 600mm
Ninth middle section openings: (2) NW 50, (2) NW 25
Tenth middle section height: 1.500mm
Tenth middle section inside diameter: 600mm
Tenth middle section openings: (2) NW 25
Eleventh middle section height: 1.200mm
Eleventh middle section inside diameter: 600mm
Eleventh middle section openings: (1) NW 150, (2) NW 100, (1) NW 50, (2) NW 25
Included items: support pipe construction, flanges, connection pieces, ceramics pall ring packing material, and many glass accessories.