Diameter (1)
Measure
Quote Cart
Buy your unused & surplus, second hand / used Tray Columns from IPP. Choose from 29 models in stock now for immediate delivery.
Highest-ranked available inventory for this selection.
Buy your unused & surplus, second hand / used Tray Columns from IPP. Choose from 29 models in stock now for immediate delivery.
Use this setting to include or exclude equipment with this feature.
Set a numeric threshold to narrow the matching listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Use this setting to include or exclude equipment with this feature.
Select one or more values to narrow the current listings.
Showing 25 of 29 matching Tray Columns.
(1.4435) tray column with sump tank
sump tank 1.1 bar @ 102 degrees C (1270 liter), 600mm diameter x 8700mm total height, (33) internal 316L stainless steel Varioflex valve trays, approx 200mm spacing, column in 3-sections ( 2-sections 2420mm high, 1- section 2260mm high), column with (1) 26.2 square meter 304 stainless steel (1.4301) tube and shell vertical condenser, manufactured by GIG, design pressure tube side 6 bar @ 35 degrees C, shell atmospheric @ 64 degrees C, (194) 17.2mm diameter x 1.2mm thick x 2.5m long 304 stainless steel tubes, 4 pass tubeside, single pass shell side, 419mm diameter 304 stainless steel shell, condenser fits on to the top of the column, (2) 3.5 m3/hr @ 34m head 316 stainless steel centrifugal pumps, type NCL oh 32/165, manufactured by Dickow Pumpen, 2.1 kw, 2900 rpm, EX design, mounted on a baseplate
distillation column with reflux splitter and separator tank
Top head is a 3" to 1.5" concentric reducer
Includes a reflux splitter and separator tank
tray/distillation column
design pressure 3.2 bar + vacuum (15500 liter)
(23) 316Ti stainless steel (1.4571) internal single flow sieve trays with weirs,
400(1000)mm tray spacing,
sieve tray column,
previously used for stripping
spaced at 1' 6" apart
Shell thickness is 0.236", and 0.196".
132-158 gal/Hr (~500 -600 liter/hr)
Ethanol/water evaporation
rated tubes 5 bar @ 180 degrees C, 23.3 liter volume, 5m² tubes surface area.
bell shaped bottom. with control panel.
R-H Grid tray (fixed valve) column
(19) R-H grid (fixed valve)
spaced at 2' 6" apart
Vertical orientation
process vent scrubbing column
Thirty 304L SS sieve trays,
spaced at 1' each,
vertical jacketed column
Jacket rated 125 psi @ 350 deg F
Repair tag, from Pfaudler, # E679-8099
Repair tag Ceramic Coatings, 1986
MFR.# 4*28145
(4) brackets.
Shell thickness 0.25" /0.1875. Head thickness 0.1875" minimum. Internal coil rated for 100 psi at 250 degrees F. (306 SS coil) 25 Glitsch Ballast trays type A-1
With OSHA ladders and platforms.
(manufactured to code but not stamped)
with davit for removal
Heads 3/16" thick. With (10) Sieve trays,
Approx. 115 3/4" puched holes with down commers.
520/610 mm diameter
Unit is 520 mm Inside diameter; 610 mm outside diameter with 3 distibuter trays
each tray has 37 28mm diameter holes
Five sets of trays on distributor two sets 43" with 3/8" holes, two sets 55" with 3/8" holes, one set 62" with 1/2" holes.
sieve tray column
Forty four sieve trays, 304L SS,
spaced at 1' 4" apart.
vertical tray rectification column system
bolt bonnet bottom
fully insulated and clad
system includes: (1) 16 square meter stainless steel tube and shell vertical reboiler condenser
manufactured by Kuhni, (1) 40 square meter stainless steel tube and shell horizontal heat exchanger (overhead), manufactured by Kuhni, (226) 25mm diameter x 2.5m long tubes, (2) bolt flat heads, 630mm dimeter shell, 3056mm total length, (1) 4 square meter spiral tube vertical heat exchanger, manufactured by Kuhni, operating pressure on both sides atmospheric at room temperature, weld dished top and bottom, 495mm diameter shell x 1003mm total height, (1) 10 square meter spiral tube vertical heat exchanger, manufactured by Kuhni, operating pressure on both sides atmospheric at room temperature, weld dished top and bottom, 694mm diameter shell x 1800mm total height, (1) 2500 liter 316 stainless steel horizontal tank (decanter), manufactured by Kuhni, pressure internal atmospheric, 1094mm diameter x 2500mm straight side, weld dished ends, mounted on saddles, (1) 100 m3/hr vacuum pump skid, driven by 3.6kw, 3/50/380 volt, 1450 rpm motor
Five sets of trays on distributor two sets 43" with 3/8" holes, two sets 55" with 3/8" holes, one set 62" with 1/2" holes.
3" diameter x 36" straight side, With (10) Glitsch cartridge type perforated sieve trays.
Top head is a 3" to 1.5" concentric reducer. With reflux splitter and decanter tank.
distillation column
reflux splitter and decanter tank
National board stamped
Rated 150/FV @ -20 to 450 degrees F internal.
8-1/8" ID x 117-3/8" length, bolted top and bottom]
Schedule 20 straight side, bottom head is 0.250" thickness
Top head is 8" x 3" concentric reducer with 3" 150 lb flanged end, bottom head is dished.
Column has (11) Glitch cartridge type perforated trays, 0.074 thick 316SS.
485 lbs empty weight.
Distillation column with reflux splitter
(10) Glitch cartridge type perforated trays
Empty weight 228 lbs. With reflux splitter
Fabrik #7244
pressure 6 bar + vacuum @ 200 degrees C (16750 liter)
980mm internal diameter x 21850mm straight side,
internal valve trays
400mm spacing between trays
ladders and platform may be available
Spare distribution tray
DMA stripping column
Still in original crate
zirconium
1/2" head thickness, 3/16" shell thickness
14 trays at 24" spacing
Distillation column with reflux splitter
(10) Glitsch cartridge type perforated trays with 6" spacing.
228 empty weight. With reflux splitter.
When your process demands efficient separation, purification, or distillation, industrial columns offer scalable, high-performance solutions across a wide range of industries. With over 47 years of process equipment expertise, IPP provides immediate access to high-quality used columns sourced from 20 complete plant sites and included in our inventory of over 15,000 ready-to-ship pieces of equipment. Choosing used columns from IPP helps companies reduce capital investment, shorten project lead times, and maintain efficient separation performance.
Industrial columns are vertical vessels designed to facilitate mass transfer between phases — such as gas-liquid or liquid-liquid — making them essential for distillation, absorption, stripping, and extraction processes. Their design and internal configuration are critical to achieving precise separation efficiency.
Industrial columns are built for corrosion resistance, pressure tolerance, and chemical compatibility:
Learn more about distillation column design and optimization from Chemical Processing.
Search the IPP inventory or contact IPP’s equipment specialists to find a used column that matches your process separation needs. With ready-to-ship inventory, IPP helps companies improve separation efficiency, reduce downtime, and control project budgets.
Have questions about Columns or our services? Learn more about our products and why customers choose IPP.
